We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA 15-pin male to three female power splitter cable 13.8 inch length

EN-Labs

EN-Labs SATA Power Splitter Cable 1 to 3 13.8 Inch Black

SKU CH-ADGN-SS9PQ

Splits one SATA 15-pin power header into three female connectors for SSD, HDD or DVD-ROM drives, with 13.8 inch cable and 4.5 inch spacing between connectors

  • Connect up to three drives from one PSU port
  • 8 inch cable reaches across standard case layouts
  • 5 inch spacing between each female connector
  • 20AWG copper conductors deliver reliable 5V and 12V power
  • SATA 15-pin male to three female connectors fits SSD, HDD and optical drives

SATA Power Splitter 1 to 3

This EN-Labs cable turns a single SATA 15-pin male header into three female connectors for drives. It measures 13.8 inches overall with 4.5 inches between each connector. Twenty AWG copper conductors carry 5V and 12V power to 2.5 and 3.5 inch hard drives, SSDs or optical drives. The black parallel layout keeps wiring tidy inside the case.

Builders adding multiple drives on one rail

Suits anyone expanding storage with several SATA devices from one PSU lead. The 15-pin connectors fit standard SSD, HDD and DVD-ROM units. Buyers who need 3.3V output for specialised enterprise drives should look elsewhere. Systems that require right-angle plugs or longer reach between bays will need a different cable.

No 3.3 volt rail on the 15-pin connectors

The splitter delivers only 5V and 12V DC, so drives requiring the 3.3V line will not function. Check each drive specification before purchase to confirm compatibility. This single voltage constraint decides whether the part fits your build.

Highlights

  • Connect up to three drives from one PSU port
  • 8 inch cable reaches across standard case layouts
  • 5 inch spacing between each female connector
  • 20AWG copper conductors deliver reliable 5V and 12V power
  • SATA 15-pin male to three female connectors fits SSD, HDD and optical drives

Specifications

No published specifications for this item yet.

Questions about this item

How many drives can I run from one PSU SATA power header with this splitter?

The cable splits a single SATA 15-pin male connector into three female connectors so you can power three SATA devices such as SSDs, HDDs or optical drives from one PSU header.

Does this splitter provide the 3.3 V rail that some newer drives require?

No, the cable delivers only 5 V and 12 V DC; the 3.3 V line is not connected, so drives needing 3.3 V will not spin up.

What spacing should I allow between the three device connectors when routing the cable?

Each female connector is spaced 4.5 inches apart along the 13.8 inch total length, giving enough room to reach drives in adjacent bays.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.