EN-Labs
EN-Labs SATA III cable 18 inch 90 to 180 degree UV Red
An 18-inch SATA III data cable with a 90-to-180-degree angled connector, latch lock, shielded 26 AWG copper conductors and 6.0 Gbps support
- TypeSATA III
- Length16" - 20"
- Cable Length18"
- Connector Number2
- Connector Detail1 x SATA to 1 x SATA
- Terminal GenderFemale to Female
- 18 inch length fits tight drive bays
- 90 to 180 degree connectors ease routing
- Latching straight end secures the link
- 0 Gbps SATA III speed supported
- UL listed and RoHS compliant build
SATA III cable with angled connectors
The EN-Labs cable carries SATA III signals at up to 6.0 Gbps and remains compatible with SATA I and II ports. It uses 26 AWG tinned copper conductors with shielding to protect data integrity. One end is a 90 degree latch connector, the other a straight 180 degree latch connector, both 7 pin L type key receptacles.
Suits tight drive bays and troubleshooting kits
Builders working in compact cases or stacked drive cages benefit from the mixed angle layout that routes cleanly around obstacles. The latch on each end prevents accidental disconnection during transport or vibration. Buyers who need a straight through cable or a different length should look elsewhere.
Sustained throughput matches host and drive limits
Transfer speed is capped by the slowest connected device rather than the cable itself. Shielded copper construction maintains signal quality over the 18 inch run during long copy sessions. UL listed and RoHS compliant materials meet standard safety and environmental requirements.
Highlights
- 18 inch length fits tight drive bays
- 90 to 180 degree connectors ease routing
- Latching straight end secures the link
- 0 Gbps SATA III speed supported
- UL listed and RoHS compliant build
Specifications
| Type | SATA III |
|---|---|
| Length | 16" - 20" |
| Cable Length | 18" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 18 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | 1 Angle |
Questions about this item
What motherboard or host controller port does this cable plug into?
One end has a straight 180-degree 7-pin SATA connector with a latch that locks into any standard internal SATA port on a motherboard or host controller.
Will this cable run at full speed with a SATA II hard drive I already own?
The cable is backwards compatible with SATA I and II ports, so a legacy drive will connect and operate at its own rated speed.
How can I confirm the link is running at 6 Gbps after installation?
Check the negotiated link speed in the system BIOS or with a tool such as CrystalDiskInfo; it should show SATA 6 Gbps when both drive and port support SATA III.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114223BTC
In stock
