Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Six-inch SATA III cable with 180° latching connectors supports 6.0 Gbps and uses 26 AWG tinned copper conductors
This 6-inch SATA III data cable uses 180-degree latching connectors on both ends to secure drives in confined chassis. The 26AWG tinned copper conductors are shielded and rated for 6.0 Gbps transfer speeds under the SATA revision III specification. It connects host controllers to HDDs or SSDs with a simple straight-through layout.
Builders who need a secure, low-profile link between a motherboard port and a nearby drive will find the latch helpful. The fixed 6-inch length makes it impractical for routing across full-tower cases or behind drive cages that demand longer cables. Users requiring right-angle connectors or extended reach should look elsewhere.
Both ends use a 7-pin SATA 180-degree latching receptacle, so the cable only works where straight connectors clear surrounding components. If the drive bay or motherboard header needs an angled plug, this cable will not seat properly.
| Type | SATA III |
|---|---|
| Color | Clear |
| Length | 6" |
| Cable Length | 6 in. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 6 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
The 26 AWG tinned copper conductors and 180-degree latch connector are rated for the cable's lifetime; no scheduled replacement is required.
The attached drive or host controller limits sustained throughput; the cable itself supports the full 6.0 Gbps SATA III rate.
The short 6-inch shielded cable adds negligible resistance, so it does not increase heat or power draw during continuous use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?