Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
A 24-inch SATA III cable with locking latches, 26AWG tinned copper conductors and 6.0 Gbps support for secure drive connections
The EN-Labs SATA III cable measures 24 inches and uses 26AWG tinned copper conductors with shielding. It connects SATA drives to motherboards or host controllers and supports the SATA revision III 6.0 Gbps interface. The 180-degree straight connectors include a latch for secure attachment in tight spaces. UL listed and RoHS compliant construction meets baseline safety and environmental standards.
Actual data transfer speed is limited by the rating of the attached equipment. The cable is backwards compatible with SATA I and II ports, but will not exceed the performance ceiling of the slowest connected device. It carries data only and does not supply power to the drive. Builders needing longer runs or external eSATA connections will require a different cable specification.
The latch on each 7-pin connector resists accidental disconnection during drive swaps or case maintenance. UV green jacket colour aids cable identification inside crowded enclosures. Shielded 26AWG conductors reduce signal interference in dense routing scenarios. Technicians keeping a spare on hand gain a reliable troubleshooting link for storage diagnostics.
| Type | SATA III |
|---|---|
| Length | 21" - 25" |
| Cable Length | 24" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 24 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | Straight |
The cable measures 24 inches from connector to connector, fitting the 21 to 25 inch range shown in the specifications.
It supports SATA revision III up to 6 Gbps, so the drive will run at its rated SATA III speed rather than being limited by the cable.
The 7-pin 180-degree latching receptacle follows the SATA III specification and is backwards compatible with SATA I and II ports.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?