Monoprice Inc. 5376 Cat5e Punch Down Keystone Jack White
- White
- 0.1
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
A 24 inch SATA III data cable with locking latches for secure drive connections up to 6.0 Gbps
This 24-inch SATA III data cable carries a locking latch on each straight 180-degree connector to prevent accidental disconnection. It links a single SATA drive to a motherboard or host controller inside a desktop or server chassis. The silver jacket makes the cable easy to spot among other wiring. IT technicians and DIY builders keep it on hand for quick drive swaps or storage upgrades.
Rated for SATA revision III, the cable supports up to 6.0 Gbps transfer speed, limited only by the attached drive and controller. It remains fully compatible with SATA I and II ports, so older drives work without adapters. The 26 AWG tinned copper conductors and shielding preserve signal integrity across the full length. Builders needing longer runs or multiple drives per cable will need a different solution.
Each 7-pin receptacle uses an L-type key and a metal latch that clicks into place, holding firm in tight drive bays or vibration-prone enclosures. The conductors meet UL listing and RoHS compliance for safety and environmental standards. Straight 180-degree ends suit standard motherboard headers and drive backplanes. Right-angle routing or external eSATA bulkhead mounting is not supported by this cable.
| Type | SATA III |
|---|---|
| Length | 21" - 25" |
| Cable Length | 24" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 24 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | Straight |
Yes, the cable is backwards compatible with SATA I and SATA II ports while supporting up to 6.0 Gbps on SATA III devices.
The 180-degree latching receptacle clicks into place on the drive and motherboard ports, giving a tactile lock that prevents accidental disconnection.
The box contains only the single 26AWG tinned copper SATA III cable with straight locking connectors; no additional brackets, screws or adapters are supplied.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?