Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
18-inch SATA III data cable with locking latch supports 6.0 Gbps speeds for secure drive connections
This 18-inch SATA III data cable links a 7-pin SATA drive to a motherboard or host controller at up to 6.0 Gbps. It serves IT technicians who keep a spare for troubleshooting and DIY builders adding storage to a desktop system.
Verify that both the drive and the host have standard 7-pin SATA ports and that an 18-inch straight run reaches between them without strain. The latching receptacles need a clear line of insertion; angled or low-profile headers may block the latch from engaging fully.
The cable uses 26 AWG tinned copper conductors with shielding and carries UL listing plus RoHS compliance. Straight 180-degree latching connectors lock in place to resist vibration, while the UV green jacket aids cable identification inside a crowded chassis.
| Type | SATA III |
|---|---|
| Length | 16" - 20" |
| Cable Length | 18" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 18 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | Straight |
The package contains one 18 inch SATA III data cable with latching connectors; no brackets, screws or additional accessories are included.
The 18 inch length fits most internal drive-to-motherboard runs in ATX builds; choose a shorter or longer cable only if your routing path is unusually tight or spans the full case depth.
The cable supports up to 6.0 Gbps, but the real transfer rate is limited by the drive and controller you connect; with a SATA III SSD on a SATA III port you will reach the interface maximum.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?