We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
UV-green SATA data cable, 10 inch straight locking connectors

EN-Labs

EN-Labs SATA III 10 inch Locking Cable UV Green

SKU CH-8C9D-G6E5D

A 10-inch SATA III data cable with locking latch connectors for secure drive connections up to 6.0 Gbps

  • TypeSATA III
  • Length6" - 10"
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA
  • Terminal GenderFemale to Female
  • Specifications- Connector : 7-pin SATA 180 Degree latching Receptacle "L"
  • Secure latch prevents accidental disconnects
  • 10-inch length fits tight drive bays cleanly
  • 26AWG tinned copper conductors ensure reliable signal
  • 0 Gbps SATA III throughput for fast transfers
  • UL listed and RoHS compliant for safety

10-inch SATA III locking cable

This 10-inch SATA III cable carries a 6.0 Gbps rating and uses 26AWG tinned copper conductors with shielding. The 180-degree latching connectors lock into drive and motherboard ports for a secure fit in tight spaces. It is UL listed and RoHS compliant.

Replaces loose or non-latching SATA leads

The locking latch prevents accidental disconnects that can occur with standard friction-fit cables during drive swaps or case moves. Backwards compatibility with SATA I and II ports means it works in older systems without a controller upgrade. The jump is worth it when cable routing leaves no room for a wide grip.

Sustained throughput at the rated 6.0 Gbps

Shielded 26AWG conductors maintain signal integrity over the full 10-inch run under continuous read and write loads. Actual transfer speed remains limited by the attached drive and controller rather than the cable itself. The latch keeps the connection stable during prolonged heavy I/O.

Highlights

  • Secure latch prevents accidental disconnects
  • 10-inch length fits tight drive bays cleanly
  • 26AWG tinned copper conductors ensure reliable signal
  • 0 Gbps SATA III throughput for fast transfers
  • UL listed and RoHS compliant for safety

Specifications

TypeSATA III
Length6" - 10"
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Terminal GenderFemale to Female
Specifications- Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector
- Supports SATA revision III up to 6 Gbps
- Backwards compatible with SATA I, II ports
- Cable length is 10 inches,
- 26AWG tinned copper conductors
- UL listed and RoHS compliant
ShieldingYes
ConductorCopper Conductor
FeaturesThe SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers.
The straight connector has a latch to provide a secure connection in tight spaces.
IT technicians always need a spare on hand as a troubleshooting tool.
DIY gamers can quickly upgrade their computer for expanded storage.
It is backed by a lifetime warranty and product support.
StyleStraight

Questions about this item

Will the 10 inch cable reach between my motherboard and drive cage?

The cable measures 10 inches end to end, so measure the routing path inside your case before ordering.

How do I engage the latch on the 7-pin SATA 180 degree connector?

Push the straight connector straight in until the latch clicks; do not angle it or the latch will not seat.

When should I replace this 26AWG tinned copper cable?

Replace it if the latch no longer holds, the jacket shows kinks, or you experience intermittent drive detection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.