We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 6-inch SATA data cable, UV green, locking connectors

EN-Labs

EN-Labs SATA cable 6" UV Green locking

SKU CH-9ZE4-3HFJR

A 6-inch SATA III data cable with locking latches for secure drive connections in tight spaces

  • TypeSATA III
  • Length6" - 10"
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA
  • Terminal GenderFemale to Female
  • Specifications- Connector : 7-pin SATA 180 Degree latching Receptacle "L"
  • Secure latch keeps drive connected in tight builds
  • 6 Gbps bandwidth handles modern SSD speeds
  • 26 AWG tinned copper conductors resist signal loss
  • UL listed and RoHS compliant for safety standards
  • 6 inch length reduces clutter inside small cases

6-inch SATA III cable for internal drives

This six-inch SATA III cable connects hard drives and solid-state drives to motherboard or host-controller ports. The short length suits tight chassis layouts where longer cables would block airflow or interfere with other components. Latching 7-pin receptacles on both ends keep the connection secure during transport or vibration. It is aimed at system builders and IT technicians who need a reliable spare for upgrades or troubleshooting.

Latching connectors simplify installation

The straight 180-degree plugs snap into place with an audible click, so the cable will not pull loose when you route it behind drive cages or graphics cards. Because the latch releases with a gentle squeeze, you can remove the cable without forcing the port or damaging the motherboard header. Backward compatibility with SATA I and II ports means the same cable works across mixed-generation hardware. No tools or special drivers are required.

Shielded 26 AWG conductors maintain 6.0 Gbps under

The tinned copper wires and full shielding reduce crosstalk and electromagnetic interference during long file transfers or continuous disk-array activity. UL listing and RoHS compliance confirm the materials meet recognised safety and environmental standards. Actual throughput remains limited by the slowest connected device, so the cable will not create a bottleneck in a properly specified storage chain.

Highlights

  • Secure latch keeps drive connected in tight builds
  • 6 Gbps bandwidth handles modern SSD speeds
  • 26 AWG tinned copper conductors resist signal loss
  • UL listed and RoHS compliant for safety standards
  • 6 inch length reduces clutter inside small cases

Specifications

TypeSATA III
Length6" - 10"
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Terminal GenderFemale to Female
Specifications- Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector
- Supports SATA revision III up to 6 Gbps
- Backwards compatible with SATA I, II ports
- Cable length is 6 inches,
- 26AWG tinned copper conductors
- UL listed and RoHS compliant
ShieldingYes
ConductorCopper Conductor
FeaturesThe SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers.
The straight connector has a latch to provide a secure connection in tight spaces.
IT technicians always need a spare on hand as a troubleshooting tool.
DIY gamers can quickly upgrade their computer for expanded storage.
It is backed by a lifetime warranty and product support.
Cable Length6"
StyleStraight

Questions about this item

How can I verify the cable is running at 6.0 Gbps after connecting it?

The cable supports SATA III up to 6.0 Gbps; actual speed depends on the drive and motherboard port, so check the negotiated link rate in your BIOS or OS storage utility.

What comes in the package and is anything else required?

The box contains one 6-inch SATA III data cable with 180-degree latching connectors; no extra parts are needed for a standard drive-to-motherboard connection.

Should I choose the 6-inch or 10-inch length for a compact build?

The listed length is 6 inches, which suits tight spaces; a 10-inch option is mentioned in the range but not detailed in this listing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.