Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
A 6-inch SATA III cable with a 90° to 180° locking connector for drives in tight spaces
This 6-inch SATA cable links a drive to a motherboard or host controller using a 90-degree connector on one end and a straight 180-degree connector on the other. The short length suits cramped drive bays or back-to-back drive cages where a longer cable would obstruct airflow. It is built for internal storage upgrades or IT troubleshooting kits.
The cable supports the SATA revision III interface up to 6.0 Gbps and remains backwards compatible with SATA I and II ports. Actual transfer speed is limited by the rating of the attached drive and controller, so a SATA III SSD will not exceed its own specification even with this cable. No protocol conversion or signal amplification is performed.
A latch on the straight connector secures the connection against vibration or accidental dislodgement during transport or case maintenance. The 26AWG tinned copper conductors are shielded to reduce electromagnetic interference inside a dense chassis. UL listed and RoHS compliant materials meet common safety and environmental standards for internal wiring.
| Type | SATA III |
|---|---|
| Length | 6" - 10" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 6 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Cable Length | 6" |
| Style | 1 Angle |
The cable has a 90° connector on one side and a 180° connector on the other; choose the orientation that fits your drive bay and motherboard layout.
The cable supports up to 6.0 Gbps, but actual throughput is limited by the drive and controller you connect.
Yes, the cable is backwards compatible with SATA I and II ports while still supporting the 6 Gbps specification.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?