Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Six-inch SATA III data cable with a 90-degree to 180-degree angled latch for secure connections in tight spaces
The EN-Labs SATA cable measures six inches and carries a 90-degree plug on one end and a straight 180-degree plug on the other. Both connectors are 7-pin SATA receptacles with a locking latch for a firm seat. It is built with 26AWG tinned copper conductors and shielded for signal integrity.
Use this cable when an existing data lead is too long, unsecured, or lacks a locking tab. The right-angle connector fits tight drive bays or crowded motherboard headers where a straight plug would foul adjacent components. The jump is worth it whenever cable routing or vibration makes a standard lead unreliable.
The cable supports the full 6.0 Gbps throughput of SATA III and remains backward compatible with SATA I and II ports. Actual transfer speed is limited by the drive and controller attached. It is not suited for external eSATA runs or for bridging longer distances inside full-tower chassis.
| Type | SATA III |
|---|---|
| Length | 6" - 10" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 6 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Cable Length | 6" |
| Style | 1 Angle |
The 90-degree plug extends sideways from the drive port, so allow roughly the connector height plus cable bend radius behind the device.
Attach the straight 180-degree end with its latch to the motherboard first, then connect the 90-degree end to the drive.
Replace it if the latch no longer clicks, the conductors show kinks, or you experience intermittent 6.0 Gbps link errors.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?