Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
A 24-inch SATA III data cable with a 90-degree to 180-degree angled latch connector for secure internal drive connections at up to 6.0 Gbps
This 24-inch SATA III cable connects 2.5-inch SSDs and 3.5-inch hard drives to motherboard ports or host controllers. One end is a 90-degree receptacle and the other is a straight 180-degree connector, both with 7-pin keyed sockets. The straight end includes a latch that clicks into place for a secure fit in tight drive cages. Shielded 26 AWG tinned copper conductors carry the signal.
The right-angle plug keeps the cable close to the drive PCB, useful in cramped enclosures or behind backplanes where a straight plug would foul the side panel. It is not for external eSATA brackets or hot-swap bays that require a shielded bulkhead connector. Buyers who need a straight-to-straight layout or a longer run for full-tower routing should look at a different cable.
The cable is rated for SATA revision III at 6.0 Gbps and is backwards compatible with SATA I and II ports. Actual throughput is limited by the slowest device in the link, so a SATA II drive or port will operate at its native speed.
| Type | SATA III |
|---|---|
| Length | 21" - 25" |
| Cable Length | 24" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 24 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | 1 Angle |
The right-angle end adds about 24 mm beyond the drive's SATA port, so allow at least 25 mm between the drive and the case wall or adjacent card.
Insert the 90-degree end into the drive, then press the straight latch end into the motherboard until it clicks; forcing the latch end first often bends the key.
Swap it if the latch no longer holds, the 26 AWG conductors show kinks, or the UV-red jacket cracks near the 90-degree bend after repeated routing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?