We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five short yellow SATA cables with locking latches

EN-Labs

EN-Labs SATA 3.0 Cable 5 Pack 3.94 Inch Yellow

SKU CH-8WB4-WT7CN

Five SATA 3.0 data cables, 3.94 inches each, with locking latches and 26AWG tinned copper conductors for 6 Gbps transfers

  • SATA 3.0 delivers up to 6 Gbps transfer speed
  • Locking latch secures connection to prevent accidental disconnection
  • 26AWG tinned copper conductors ensure reliable signal integrity
  • 94 inch length fits tight spaces inside compact cases
  • Five cables provide spares for RAID builds or multiple drives

Five-pack SATA 3.0 cables for tight builds

This set supplies five yellow SATA 3.0 cables, each 3.94 inches long, with locking latches that secure the connection to hard drives, SSDs or optical drives. The 26 AWG tinned copper conductors support the SATA Revision 3.0 interface for data rates up to 6 Gbps. Builders working in compact cases or arranging RAID arrays gain a tidy, colour-coded loom without excess slack.

Suits cramped chassis and multi-drive arrays.

Installers who need short, secured links between closely spaced SATA ports and drives will find the 3.94 inch length ideal for clean cable management. The locking latch prevents accidental disconnection during transport or vibration. Anyone whose motherboard-to-drive distance exceeds this short reach, or who prefers right-angle connectors for rear-mounted backplanes, should choose a longer or differently angled cable.

3.94 inch fixed length decides fit

The single specification that determines compatibility is the 3.94 inch cable length; it must span the gap between your SATA port and the drive connector with enough slack to avoid strain. If the routing path is longer, the cable will not reach, regardless of the locking latch or 6 Gbps rating. Measure the exact port-to-drive distance before ordering to confirm this pack matches your build.

Highlights

  • SATA 3.0 delivers up to 6 Gbps transfer speed
  • Locking latch secures connection to prevent accidental disconnection
  • 26AWG tinned copper conductors ensure reliable signal integrity
  • 94 inch length fits tight spaces inside compact cases
  • Five cables provide spares for RAID builds or multiple drives

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the 3.94 inch cable need between the SATA port and the drive?

The cable is 3.94 inches long, so the drive must sit within that distance of the motherboard or controller port; allow a little extra room for the locking latch to engage fully.

How do I seat the SATA 3.0 connector so the locking latch clicks?

Align the L-shaped key on the plug with the port, push straight in until the metal latch snaps over the port's notch — angling the plug prevents the latch from catching.

When should I replace one of the five cables in the pack?

Swap a cable if the locking latch no longer holds, the 26 AWG conductors show kinks or exposed copper, or you get intermittent 6 Gbps link errors on a known-good drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.