We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small shielded RJ45 coupler with gold contacts and lightning protection tubes

EN-Labs

EN-Labs RJ45COUPLERPR Shielded RJ45 Coupler with Lightning Protection

SKU CH-M69A-X5336

Shielded RJ45 coupler extends two Ethernet cables, supports Cat7 to Cat5, and adds eight lightning-protection tubes for 10 Gbps links

  • FeaturesFunction: RJ45 coupler help extend the connection between tw
  • Extends Ethernet links between two patch cables
  • Shielded RJ45 coupler with gold-plated contacts
  • Eight lightning protection tubes on the PCB
  • Meets Category 6 performance for 10 Gbps speeds
  • Compatible with Cat7, Cat6, Cat5e and Cat5 networks

EN-Labs Shielded RJ45 Coupler

The EN-Labs RJ45COUPLERPR is a shielded in-line coupler that joins two Ethernet patch cables to extend a network run. It carries eight lightning protection tubes on its printed circuit board to guard connected equipment against surge damage. Gold-plated contacts and a secure snap-in clip provide a corrosion-free link. The unit is rated to Category 6 performance levels.

Installers extending existing cable runs

This coupler suits installers who need to lengthen a Cat5e, Cat6 or Cat7 link without running a single longer cable. The built-in surge protection makes it a practical choice for runs that cross outdoor or industrial zones where transient voltages are a risk. Builders who require a tool-less keystone jack or a field-terminable plug for new cable ends should look at a different connector type.

Category 6 certified performance

The decisive specification is the Category 6 certification, which confirms the coupler can handle signalling up to 10 gigabit speeds on compatible cabling. If the installation demands a higher category rating such as Cat6a or Cat7 verified performance, this part does not meet that requirement.

Highlights

  • Extends Ethernet links between two patch cables
  • Shielded RJ45 coupler with gold-plated contacts
  • Eight lightning protection tubes on the PCB
  • Meets Category 6 performance for 10 Gbps speeds
  • Compatible with Cat7, Cat6, Cat5e and Cat5 networks

Specifications

BrandEN-Labs
ModelRJ45COUPLERPR
FeaturesFunction: RJ45 coupler help extend the connection between two Ethernet patch cables, they are compatible with Cat7,Cat6, Cat5e,Cat5 network Certified Safe: These RJ45 Coupler meets Category 6 performance, Safety: The coupler are gold plated contacts and easy snap-in retaining clip to ensure a secure and corrosion free connection Fast Speed: RJ45 Coupler extender can speed up to 10 gigabite for connecting Cat7/Cat6 Ethernet cable with 8 Lightning protection tube, protect your device from Surge Thunder damage

Questions about this item

What does the 10 gigabit rating mean when I plug two patch cables into this coupler?

It supports up to 10 gigabit Ethernet speeds across the link when used with Cat6 or Cat7 cables, passing the full bandwidth through the gold-plated contacts.

How does the shielded RJ45 interface and lightning protection affect the connection?

The shielded housing and eight protection tubes on the PCB guard against surge damage while maintaining Category 6 performance through the standard RJ45 jack.

What physical space or mounting does this inline coupler need?

It sits inline between two RJ45 plugs, requiring only the cable bend radius and no extra brackets, screws or panel cut-outs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.