EN-Labs Raspberry Pi B+ Pi 2 Pi 3 Heatsink Kit 10pcs Black Aluminium 14mm 7.5mm 8.8mm

Raspberry Pi Heatsink Kit

This kit supplies ten anodised black aluminium heatsinks designed for Raspberry Pi B+, Pi 2 and Pi 3 boards. Each set includes one 14mm CPU heatsink and one 8.8mm LAN heatsink, giving five complete kits per pack. The parts use a peel-and-stick thermal adhesive layer for tool-free installation on the corresponding chip modules. They are aimed at hobbyists and embedded developers who need passive cooling for these specific single-board computers.

Adhesive Mounting Constraints

The pre-applied thermal adhesive creates a permanent bond once pressed onto clean, grease-free chip surfaces. Repositioning after firm pressure is not practical, so alignment must be correct on the first attempt. The adhesive thickness is fixed and cannot be replaced with a different thermal interface material. Builders who require removable or reusable cooling solutions should consider clip-on or screw-mounted alternatives instead.

Heatsink Height Profile

The CPU heatsink measures 14mm wide by 7.5mm tall, while the LAN heatsink measures 8.8mm wide by 5mm tall. These dimensions determine whether the assembled board will fit inside a chosen enclosure or stack with HATs and other add-on boards. Buyers who need lower-profile cooling for slim cases or tight vertical clearances must verify these heights against their mechanical constraints before purchasing.