We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PMMA hub with ten 3-pin ARGB ports and Molex power, plus 30cm extension cable

EN-Labs

EN-Labs PR5VRGB1X10MOL ARGB Splitter Hub 10 Channel 30cm

SKU CH-C6H3-WHH7H

Connects one 5 V ARGB header to ten devices with Molex power and a 1.64 ft extension cable

  • Length30cm
  • Cable Length1 ft.
  • SpecificationsAddressable RGB Splitter Hub This splitter hub connects to t
  • Connector AARGB 3pin
  • Connector B5V RGB 3 pin
  • Connect 10 ARGB devices from one motherboard header
  • Molex power input keeps all channels stable
  • PMMA housing protects the circuitry inside
  • Sticky pad lets you mount the hub anywhere
  • 64ft extension cable reaches distant fans

What this hub does

The EN-Labs PR5VRGB1X10MOL connects to a single 3-pin 5V addressable RGB header on your motherboard and splits the signal to ten channels. It lets builders synchronise up to ten ARGB fans or strips through ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light or ASRock RGB LED software. It is not compatible with 12V RGB lighting.

Bundled cable and mounting

A 1.64ft RGB extension cable is included so the hub can reach headers farther from the lighting devices. A sticky pad on the PMMA case allows quick attachment to a flat surface inside the chassis without screws or brackets.

Build and connectors

The hub is housed in a transparent PMMA case that protects the PCB while keeping the wiring visible. Power is supplied through a Molex connector, providing stable current for all ten channels. Align the arrows on each connector with the header before plugging in to avoid damage.

Highlights

  • Connect 10 ARGB devices from one motherboard header
  • Molex power input keeps all channels stable
  • PMMA housing protects the circuitry inside
  • Sticky pad lets you mount the hub anywhere
  • 64ft extension cable reaches distant fans

Specifications

BrandEn-Labs
ModelPR5VRGB1X10MOL
Length30cm
Cable Length1 ft.
SpecificationsAddressable RGB Splitter Hub This splitter hub connects to the 3-pin 5V addressable RGB header or controller on your motherboard, allowing you to add 10 ARGB fans or strips for lighting synchronization via motherboard software. It is compatible with ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock RGB LED. An extra Molex power interface ensures stable power delivery for all the ARGB devices. Built-in PMMA case offers solid protection while the included sticky pad makes installation quick and easy. A 1ft RGB extension cable is also included for your convenience.
Connector AARGB 3pin
Connector B5V RGB 3 pin

Questions about this item

Will the 10-channel hub need any replacement parts over time?

The hub has no moving parts or consumable components, so no scheduled replacements are required.

What limits how many ARGB devices I can run continuously on this hub?

The hub supports up to 10 addressable RGB channels and draws auxiliary power from a Molex connector to keep all channels stable.

How much heat or noise does the hub produce when running all day?

The passive PMMA case runs silently and generates negligible heat because the hub only routes low-voltage 5 V addressable RGB signals.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.