We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with M key slot and full height metal bracket

EN-Labs

EN-Labs PCIEM2NVME M.2 NVMe PCIe x4 Data Adapter Full-profile Bracket

SKU CH-NE72-VNEHB

EnLabs adapter adds an M-key NVME SSD in 2230, 2242, 2260 or 2280 form factor to a PCIe 3.0 x4, x8 or x16 slot with a full-profile bracket and status LEDs

  • FeaturesAdds one M.2 PCIe SSD (M key) to your Windows 10, 8.x, 7, or
  • Adds an M.2 NVMe SSD to any PCIe desktop
  • Fits 2230, 2242, 2260 and 2280 M-key drives
  • Works in PCIe 3.0 x4, x8 or x16 slots
  • Backward compatible with PCIe 1.0 and 2.0
  • Built-in LEDs show power and data activity

Add NVMe storage to desktops

This PCIe adapter adds one M-key M.2 NVMe SSD to a desktop computer running Windows 10, 8.x or 7. It accepts 2230, 2242, 2260 and 2280 form factors through multiple mounting holes. A full-profile bracket is included for standard chassis installation. MacBook systems are not supported.

Check motherboard slot and SSD keying

Verify the board has a free PCIe 1.0, 2.0 or 3.0 x4, x8 or x16 slot. The adapter only works with M-key NVMe drives; B-key PCIe or SATA M.2 SSDs are not compatible. Systems released before 2015 may lack NVMe boot support, so confirm with the system vendor. No driver is required for the adapter itself.

Passive thermals and low power draw

The card has no active cooling and relies on case airflow to dissipate heat from the installed SSD. Built-in LEDs show power and data-transfer status. Power consumption is limited to the SSD and the passive bridge circuitry, adding minimal load to the motherboard slot.

Highlights

  • Adds an M.2 NVMe SSD to any PCIe desktop
  • Fits 2230, 2242, 2260 and 2280 M-key drives
  • Works in PCIe 3.0 x4, x8 or x16 slots
  • Backward compatible with PCIe 1.0 and 2.0
  • Built-in LEDs show power and data activity

Specifications

BrandEn-Labs
ModelPCIEM2NVME
FeaturesAdds one M.2 PCIe SSD (M key) to your Windows 10, 8.x, 7, or any PCIe-equipped desktop computer. MacBook is not supported. Accommodates 2230, 2242, 2260 and 2280 form factor M.2 SSDs (NVMe) via multiple mounting holes.NOTE: Systems released prior to 2015 may not support NVMe SSDs. Please check with your system provider for compatible SSD Supports PCIe 3.0 x4,x8,x16 slot equiped motherboards and is backward compatible with PCIe 1.0 and PCIe 2.0; No driver installation required ( If there is an exclamation mark after installing the adapter, please ask the SSD supplier to offer the NVME

Questions about this item

Does the EN-Labs PCIEM2NVME adapter include the M.2 NVMe SSD or must it be purchased separately?

The adapter only provides the PCIe x4 slot and mounting holes for 2230, 2242, 2260 and 2280 M-key NVMe drives; the SSD itself is not included and must be bought separately.

Which M.2 form factors does the PCIEM2NVME support and how do I choose the right one?

The card has multiple mounting holes for 2230, 2242, 2260 and 2280 lengths; choose the length that matches your M-key NVMe SSD — 2280 is the most common desktop size.

What does the PCIe 3.0 x4 rating mean for actual transfer speed once the card is installed?

The adapter connects the M.2 NVMe drive through a PCIe 3.0 x4 link, which is backward compatible with PCIe 2.0 and 1.0 slots, so the drive will run at up to PCIe 3.0 x4 speeds if the motherboard slot supports it.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.