EN-Labs
EN-Labs PCIe 1X to 16X Riser Card 60cm USB 3.0 SATA Molex 6pin
Connects a graphics card to a 1X slot using a 60cm USB 3.0 cable with SATA, Molex and 6-pin power options
- SpecificationsThe perfect solution for setting up Ethereum mining rigs, wh
- Construction1x PCI-E 16X Riser Adapter 1x PCI-E 1X Riser Adapter 1x USB3
- FeaturesMolex 4pin, SATA and 6-pin PCI-E power interface Integrate o
- Stable power delivery with 4 solid capacitors
- Multiple voltage regulation components protect the GPU
- Overcurrent protection fuse safeguards components
- Flexible 60 cm USB 3.0 cable enables free placement
- 90-degree 1X bracket eases small-case cable management
Mining riser for GPU spacing
This PCIe 1X to 16X riser card lets you mount a graphics card away from the motherboard using a 60cm USB 3.0 cable. It is designed for builders assembling Ethereum mining rigs or small-form-factor systems where the primary slot cannot accommodate a full-size GPU directly. The x1 edge connector fits any x1, x4, x8 or x16 slot and requires no driver installation.
Sustained load stability
Four solid capacitors and multiple voltage-regulation components deliver steady power during continuous mining workloads. An onboard surface-mounted fuse provides overcurrent protection to guard connected hardware if a short occurs. The 90-degree x1 adapter eases cable routing inside tight chassis without stressing the motherboard slot.
Single power input rule
The PCB integrates Molex 4-pin, SATA and 6-pin PCIe power interfaces, but only one may be connected at a time. Plugging two or three simultaneously is explicitly prohibited by the manufacturer. Choose the connector that matches your power supply and leave the others empty.
Highlights
- Stable power delivery with 4 solid capacitors
- Multiple voltage regulation components protect the GPU
- Overcurrent protection fuse safeguards components
- Flexible 60 cm USB 3.0 cable enables free placement
- 90-degree 1X bracket eases small-case cable management
Specifications
| Brand | ITHOO |
|---|---|
| Specifications | The perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners. 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Integrate Molex 4pin, SATA and 6-pin PCI-E power interface on PC |
| Construction | 1x PCI-E 16X Riser Adapter 1x PCI-E 1X Riser Adapter 1x USB3.0 cable (60cm) |
| Features | Molex 4pin, SATA and 6-pin PCI-E power interface Integrate on PCB, only one power input is needed, Please DO NOT try to plug 2 or 3 power interface simultaneously |
Questions about this item
How much power does the riser card draw during continuous mining operation?
The riser card uses four solid capacitors and on-board voltage regulation to deliver stable power to the GPU, drawing only one of the Molex 4-pin, SATA or 6-pin PCIe inputs at a time.
What power connectors must my PSU provide for this riser?
Your power supply needs at least one free Molex 4-pin, SATA or 6-pin PCIe connector; the board integrates all three but only one should be plugged in.
Will this riser work with an older motherboard that only has PCIe 1.x slots?
Yes, the 1x adapter fits any PCIe 1x, 4x, 8x or 16x slot and the 60 cm USB 3.0 cable carries the signal to the 16x side for the graphics card.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115656BTC
In stock
