We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polycarbonate bracket holding a 2.5 drive in a PCIe slot

EN-Labs

EN-Labs PCIBR25SSD 2.5" SATA Hard Drive Adapter Bracket

SKU CH-2YJV-0ANMV

Mounts a 2.5" SATA drive in a PCIe slot using a non-conductive bracket

  • FeaturesSimply attach your existing 2.5 storage device and simply sl
  • Mount 2.5" drives in a PCIe slot for extra storage when bays are full
  • Non-conductive polycarbonate chassis protects the drive from electrical contact
  • Integral riser bracket screws down for a secure, vibration-resistant fit
  • Supports any 2.5" SATA HDD or SSD without adapters or cables
  • Quick tool-free installation suits system builders and server upgrades

PCI-E Slot 2.5" Drive Bracket

The EN-Labs PCIBR25SSD converts a vacant PCI-E expansion slot into a mounting point for a 2.5" SATA hard drive or SSD. It targets builders whose front drive bays are full or who need extra storage in compact PCs, servers or rack-mount units.

Non-Conductive PCI-E Interface

The bracket slides into any standard PCI-E slot using a non-conductive connector that carries no electrical signals. Data and power must still reach the drive through separate SATA cables routed inside the chassis, so cable length and motherboard port placement become the practical limits.

Polycarbonate Chassis With Integral Riser

A rigid polycarbonate cradle holds the 2.5" device securely while the integral metal riser bracket screws to the case rear panel for vibration-resistant mounting. The tool-free drive attachment and single-slot profile keep installation quick, but the assembly occupies a full-height slot and blocks adjacent airflow in dense builds.

Highlights

  • Mount 2.5" drives in a PCIe slot for extra storage when bays are full
  • Non-conductive polycarbonate chassis protects the drive from electrical contact
  • Integral riser bracket screws down for a secure, vibration-resistant fit
  • Supports any 2.5" SATA HDD or SSD without adapters or cables
  • Quick tool-free installation suits system builders and server upgrades

Specifications

BrandEN-Labs
SeriesHard Drive Adapters
ModelPCIBR25SSD
FeaturesSimply attach your existing 2.5 storage device and simply slot the SSD-PCI into a PCIe slot (which the PCIe connector is also non-conductive of course!) and screw down the integral riser bracket as you would normally do on any PCIe adapter card. Its that easy. Ideal for when space to add extra storage drivers is running low, such as a fully populated front drive bay, the SSD-PCI is a low-cost and simple device which will give your systems the ability to add extra storage in no time. Polycarbonate, non-conductive SSD/HDU chassis Ideal cradle for 2.5 form-factor storage devices Fits in

Questions about this item

Which version of the EN-Labs PCIBR25SSD bracket should I choose for a 2.5" SATA drive?

The single model PCIBR25SSD supports any 2.5" SATA HDD or SSD, so there is no capacity or version choice to make.

What does the non-conductive PCIe connector mean once the bracket is installed in a real machine?

The plastic PCIe frame carries no electrical signals; it only secures the 2.5" drive mechanically while the drive's own SATA cable connects to the motherboard.

What interface standard does the bracket use and what does it cap in practice?

The bracket itself has no data interface; it simply holds a 2.5" SATA drive in a PCIe slot, so the SATA link speed is determined entirely by the drive and motherboard port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.