We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short adapter cable with a large four-pin Molex male plug on one end and a small four-pin female floppy power connector on the other

EN-Labs

EN-Labs MOLEX-LP4-SP4 LP4 to SP4 adapter cable 15 cm

SKU CH-VHMF-M49P3

Converts a Molex LP4 power connector to a SP4 floppy-drive connector with a 15 cm copper cable

  • TypePower
  • Connector Number2
  • Connector DetailMolex LP4 to SP4
  • Terminal GenderMale to Female
  • SpecificationsThis cable features Large Internal Molex 4pin Power Male, to
  • ConductorCopper Conductor
  • Converts LP4 power to SP4 for floppy drives
  • 15 cm cable fits tight drive bays
  • Four copper wires deliver 5 V and 12 V
  • Male LP4 to female SP4 gender matches legacy hardware
  • Simple adapter adds SP4 devices without new PSU

LP4 to SP4 Power Adapter

The EN-Labs MOLEX-LP4-SP4 is a 15 cm internal power cable that converts a large 4-pin Molex LP4 male connector into a small 4-pin SP4 female connector. It uses copper conductors to carry 5 V and 12 V power. The short length keeps cable routing tidy inside compact chassis.

Floppy Drive and Legacy Adapter Power

This adapter suits builders adding floppy drives or SP4-equipped expansion cards to a power supply that only offers LP4 plugs. It is not for systems that lack a free LP4 connector or for devices that require a different pin arrangement or voltage layout.

15 cm Cable Length

The fixed 15 cm length determines how far the SP4 device can sit from the LP4 source. Measure the internal routing path before purchase to confirm the reach is sufficient for your build.

Highlights

  • Converts LP4 power to SP4 for floppy drives
  • 15 cm cable fits tight drive bays
  • Four copper wires deliver 5 V and 12 V
  • Male LP4 to female SP4 gender matches legacy hardware
  • Simple adapter adds SP4 devices without new PSU

Specifications

BrandEn-Labs
ModelMOLEX-LP4-SP4
TypePower
Connector Number2
Connector DetailMolex LP4 to SP4
Terminal GenderMale to Female
SpecificationsThis cable features Large Internal Molex 4pin Power Male, to Small Internal Power Female connectors.Convert a LP4 4pin IDE power plug into a floppy type SP4,Suitable for adding SP4 equipted adapters, floppy drives etc. SPec Type : Molex LP4 to SP4 power adapter cable Connector A : Molex Large 4pin Male Connector B: Molex small 4pin Female Cable Length : 15CM/6 inches Voltage: 5V/12Vcd
ConductorCopper Conductor

Questions about this item

What comes in the box and do I need any extra cables or tools to connect a floppy drive?

The package contains the 15 cm adapter with a Molex LP4 male plug on one end and an SP4 female socket on the other. No extra cables or tools are required; plug it directly into an existing LP4 power lead.

Which version should I pick if my power supply only has large 4-pin Molex connectors?

This single model converts a large 4-pin LP4 connector to the small 4-pin SP4 format used by floppy drives and some adapters, so it is the correct choice for that situation.

What does the 5 V / 12 V rating mean when the cable is installed in a PC?

The four copper wires carry both 5 V and 12 V rails from the power supply through the LP4 plug to the SP4 socket, delivering the voltages a floppy drive or SP4 device expects.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.