We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 8-inch cable with a white 4-pin Molex plug on one end and a black 15-pin SATA socket with a locking latch on the other

EN-Labs

EN-Labs Molex 4-pin to SATA 15-pin Power Adapter Cable 8 inches

SKU CH-E1KV-HR9NZ

Converts a Molex 4-pin supply lead into a locking SATA 15-pin connector for 2.5" or 3.5" drives using 20AWG copper over 8 inches

  • TypePower
  • ColorMulti-Color
  • Length6" - 10"
  • SpecificationsType :SATA power Adapter cable Length: 8 inches Conductor:20
  • Connector Number2
  • Terminal GenderMale to Female
  • Powers SATA drives from legacy Molex supplies
  • 20AWG copper conductor delivers stable 12V/5V power
  • Locking 15-pin SATA connector prevents accidental disconnection
  • Compact 8-inch length keeps cable routing tidy
  • Supports both 2.5 and 3.5 inch SATA hard drives

Purpose and fit

This adapter cable connects a SATA 15-pin device to a power supply that only has Molex 4-pin LP4 connectors. It suits desktop or server builds where newer SATA hard drives or SSDs must draw 12 V and 5 V power from legacy wiring.

Setup check

Verify that your power supply has a free Molex 4-pin LP4 output and that the target drive uses a standard SATA 15-pin power input. The cable is 8 inches long with 20 AWG copper conductors, so confirm the routing distance between the PSU connector and the drive bay.

What the extras change

The SATA connector includes a locking latch that secures the plug against vibration in server chassis. No additional software, adapters or mounting hardware are bundled; the cable alone enables power delivery for both 2.5 and 3.5 inch SATA devices.

Highlights

  • Powers SATA drives from legacy Molex supplies
  • 20AWG copper conductor delivers stable 12V/5V power
  • Locking 15-pin SATA connector prevents accidental disconnection
  • Compact 8-inch length keeps cable routing tidy
  • Supports both 2.5 and 3.5 inch SATA hard drives

Specifications

TypePower
ColorMulti-Color
Length6" - 10"
SpecificationsType :SATA power Adapter cable
Length: 8 inches
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B: SATA 15-pin Female with locking latch
Power supports:12V/5V SATA devices
Connector Number2
Terminal GenderMale to Female
FeaturesProvide power to your Serial ATA hard drive through a standard Molex connection from your power supply
Ideal for desktop or servers that use Serial ATA Hard Drives. It enables connecting an internal SATA device to a power supply with only LP4 Molex connectors remaining.
Compatible with both 2.5" and 3.5" Serial ATA Hard Drives allows the use of newer hard drives with older power supplies Provides 6 inches in cable length
Connects a Serial ATA Hard Drive to a standard internal power connector SATA (15 pin) to 4 pin Molex (LP4)

Questions about this item

What connectors come on the cable and do I need anything else?

The cable has a Molex 4-pin male plug on one end and a SATA 15-pin female connector with a locking latch on the other. No extra parts are required.

Which version should I choose for a 2.5" or 3.5" drive?

One version fits both 2.5" and 3.5" SATA drives because the 15-pin connector is standard across those sizes.

What does the 12 V and 5 V rating mean when the adapter is installed?

It means the cable delivers both 12 V and 5 V rails from the Molex source to the SATA device, matching the drive's power requirements.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.