We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with one Molex 4-pin male plug splitting into three SATA 15-pin female connectors, 18 inches long

EN-Labs

EN-Labs Molex 4 Pin to 3 SATA 15-pin Power Splitter Adapter 18 Inch internal power cable

SKU CH-4P5C-WEE3T

Converts a Molex 4-pin plug into three SATA 15-pin power connectors on an 18-inch daisy-chained cable with 20AWG copper conductors

  • TypeCable Splitters
  • ColorMulti-Color
  • Length16" - 20"
  • SpecificationsType :SATA power splitter cable Length:18 inch daisy chained
  • Connector Number4
  • Terminal GenderMale to Female
  • Powers three SATA drives from one Molex connector
  • 18 inch daisy-chained length reaches drives across the case
  • 20 AWG copper conductors deliver stable 12 V and 5 V power
  • Black net jacket protects wires and improves airflow
  • Compatible with 2.5 and 3.5 inch drives, optical drives and PCIe cards

Power Splitter Cable

The EN-Labs adapter converts a single Molex 4-pin male connector into three SATA 15-pin female connectors, delivering 12V and 5V power to SATA devices through an 18-inch daisy-chained cable with 20AWG copper conductors and a black net jacket.

Compatibility Fit

Suits builders adding 2.5-inch SSDs, 3.5-inch HDDs or optical drives when the power supply has a free Molex output; not for systems that lack a spare Molex connector or for drives needing a different power interface.

Deciding Specification

One Molex 4-pin male plug feeds three SATA 15-pin female sockets in a fixed 18-inch daisy chain, so the number of drives and the reach from the power supply are set by this cable.

Highlights

  • Powers three SATA drives from one Molex connector
  • 18 inch daisy-chained length reaches drives across the case
  • 20 AWG copper conductors deliver stable 12 V and 5 V power
  • Black net jacket protects wires and improves airflow
  • Compatible with 2.5 and 3.5 inch drives, optical drives and PCIe cards

Specifications

BrandEn-Labs
ModelIDE23SATA18
TypeCable Splitters
ColorMulti-Color
Length16" - 20"
SpecificationsType :SATA power splitter cable
Length:18 inch daisy chained
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B:3 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Connector Number4
Terminal GenderMale to Female
Features3way SATA power splitter adapter.
This 18" daisy chained SATA power adapter cable plugs into a 4-pin Molex power plug and provides three 15-pin SATA power connectors for use with SATA drives and SATA power supplies.
SATA power connectors provide a Slim profile and 5V & 12V voltage

Questions about this item

How many SATA drives can the 18-inch daisy-chained cable power from one Molex connector?

The splitter provides three 15-pin SATA power connectors, so you can run up to three SATA devices such as 2.5-inch SSDs, 3.5-inch HDDs or optical drives from a single 4-pin Molex source.

Does the 20AWG copper conductor handle continuous 12 V and 5 V loads without overheating?

The cable uses 20AWG copper wires rated for 12 V and 5 V SATA devices; under sustained use the conductor gauge is the practical limit for current delivery.

What power connector must the PSU already have for this adapter to work?

Your power supply needs a free 4-pin Molex (LP4) male connector; the adapter plugs directly into it and splits into three SATA 15-pin female sockets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.