We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue internal SAS cable with 36-pin SFF-8087 host connector splitting to four 29-pin SFF-8482 drive connectors and Molex power plugs

EN-Labs

EN-Labs Mini SAS SFF-8087 to 4x SFF-8482 SAS Cable 1m Blue

SKU CH-ZY09-4X18E

Connects a 36-pin SFF-8087 host to four 29-pin SFF-8482 drives with integrated Molex power over a 1 metre blue SAS cable

  • TypeSAS
  • ColorBlue
  • Length3 ft.
  • Connector Number9
  • SpecificationsInternal mini-SAS 36-pin (SFF-8087) connector host connectio
  • ShieldingYes
  • Connects one 36-pin SFF-8087 host to four 29-pin SFF-8482 drives
  • Each target connector carries both data and power for simpler cabling
  • Shielded copper conductors protect signal integrity inside the chassis
  • One metre length fits typical server and workstation layouts
  • Blue jacket makes the cable easy to trace during maintenance

Internal SAS breakout cable

This cable connects a 36-pin SFF-8087 host port to four 29-pin SFF-8482 drive connectors with integrated Molex power. It suits builders wiring internal storage arrays or servers that use direct-attached SAS backplanes. The one metre length fits standard chassis routing without excess slack.

Capacity and headroom

Four drive endpoints share the single controller link so aggregate throughput depends on the host adapter and drive mix. Each SFF-8482 leg carries both data and power pins so no separate power cables are needed for the drives. The copper conductors and shielding maintain signal integrity over the full metre.

Thermals and power

Thinner SAS construction improves airflow compared with legacy parallel SCSI ribbons. No active components mean zero added heat or noise from the cable itself. Power for the drives is sourced through the four Molex 4-pin taps on the host side.

Highlights

  • Connects one 36-pin SFF-8087 host to four 29-pin SFF-8482 drives
  • Each target connector carries both data and power for simpler cabling
  • Shielded copper conductors protect signal integrity inside the chassis
  • One metre length fits typical server and workstation layouts
  • Blue jacket makes the cable easy to trace during maintenance

Specifications

TypeSAS
ColorBlue
Length3 ft.
Connector Number9
SpecificationsInternal mini-SAS 36-pin (SFF-8087) connector host connection Internal SAS 29-pin (SFF-8482) connections (4) Drives Point-to-point SCSI makes setting up SCSI easier than ever Thinner SAS cables increase cooling and airflow compared to older parallel SCSI cables Cable length: 1 meter Color: Blue Contacts 1 x Mini-SAS 36-pin (SFF-8087) 4 x SAS 29-pin (SFF-8482) 4 x Molex 4-pin connections Package Contains SAS Cable Internal, Mini SAS 36-pin to SAS 29-pin
ShieldingYes
ConductorCopper Conductor

Questions about this item

Will the SFF-8087 end plug into my older HBA that uses the same 36-pin mini-SAS port?

Yes — the cable terminates in a standard 36-pin mini-SAS SFF-8087 connector, so it mates directly with any HBA or RAID controller that presents that same port.

How can I verify the four drive links are active once the cable is seated?

Each of the four SFF-8482 connectors carries both data and power; the host BIOS or OS disk utility will show all attached drives enumerated on their respective lanes.

Does the package include the Molex power leads for the four SFF-8482 plugs or must I source them separately?

The cable assembly already integrates four 4-pin Molex LP4 taps, one per SFF-8482 connector, so no extra power cables are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.