We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal standoffs and screws in a compartmented box with a screwdriver

EN-Labs

EN-Labs M.2 SSD Mounting Kit 40pcs 2.5mm 4.5mm

SKU CH-DVBZ-YA59R

A 40-piece kit of M.2 standoffs and screws in four height combinations covering most motherboard layouts, plus a screwdriver

  • 40-piece kit covers most motherboard M.2 layouts
  • 5 mm and 4.5 mm standoff heights fit common board spacings
  • Includes M2 and M3 thread sizes for broad brand compatibility
  • Five pre-sorted sets match ASUS, ASRock, Gigabyte and MSI patterns
  • Screwdriver supplied so installation needs no extra tools

M.2 SSD mounting kit for motherboards

This 40-piece kit supplies standoffs and screws to secure M.2 NVMe SSDs on desktop or laptop motherboards. Four distinct height combinations cover the mounting points found on most board designs. A small screwdriver is included for installation. The assortment suits builders assembling new systems or upgrading storage on existing platforms.

Check motherboard standoff height before ordering

Verify the threaded hole depth and required standoff length on your specific motherboard model. The kit provides 2.5 mm, 4.5 mm, 6 mm and 3 mm standoff options across five labelled sets each. Select the set that matches your board's specification to avoid a loose or raised drive. No other tools are required beyond the supplied driver.

Passive hardware with no thermal or power impact

The screws and standoffs are passive metal fasteners that generate no heat and draw no power. They add no audible noise to the system. Correctly torqued fasteners ensure the SSD makes full contact with any motherboard heatsink or thermal pad, allowing the drive to run at its rated temperature. Over-tightening should be avoided to prevent thread damage.

Highlights

  • 40-piece kit covers most motherboard M.2 layouts
  • 5 mm and 4.5 mm standoff heights fit common board spacings
  • Includes M2 and M3 thread sizes for broad brand compatibility
  • Five pre-sorted sets match ASUS, ASRock, Gigabyte and MSI patterns
  • Screwdriver supplied so installation needs no extra tools

Specifications

No published specifications for this item yet.

Questions about this item

What exactly comes in the EN-Labs M.2 SSD Mounting Kit box and is any tool included?

The box contains 40 pieces total: five sets of M2 standoffs and screws sized for ASUS ITX boards, five sets for ASUS and ASRock boards, five sets for Gigabyte boards, five sets of M3 standoffs and screws for MSI boards, and one screwdriver.

Which of the four standoff and screw combinations should I choose for my motherboard brand?

Use the M2×(2.5+2.5) mm sets for ASUS ITX boards, the M2×(4.5+2.5) mm sets for ASUS or ASRock boards, the M2×(6+4) mm sets for Gigabyte boards, and the M3×(6+3) mm sets for MSI boards.

What does the 2.5 mm and 4.5 mm standoff height mean once the SSD is installed in my machine?

Those heights set the vertical gap between the motherboard and the M.2 SSD; matching the correct height keeps the drive level and prevents stress on the connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.