We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot and 2.5 inch SATA connectors

EN-Labs

EN-Labs M.2 SATA B/B+M Key to 2.5" SATA Adapter

SKU CH-D6JN-5Q1HP

Converts SATA-based M.2 B-key or B+M-key SSDs (2230–2280) to a 2.5" SATA 6Gbps drive

  • Changer TypeM.2 SATA
  • FeaturesFeatures: Convert an M.2 NGFF SSD into 2.5in SATA (6Gbps) in
  • Converts M.2 SATA SSDs to 2.5" SATA 6.0 Gbps
  • Works with B key and B+M key M.2 modules
  • Fits 2230 2242 2260 2280 form factors
  • Backwards compatible with SATA 1.5 3.0 Gbps
  • Lowers power draw with efficient M.2 SSD

M.2 SATA to 2.5" Adapter

This adapter converts a SATA-based M.2 NGFF SSD into a standard 2.5-inch SATA drive. It accepts B-key and B+M-key modules in 2230, 2242, 2260 and 2280 lengths. The product is built for users who want to add M.2 SATA storage to a system equipped with 2.5-inch drive bays.

Fits 2.5-inch drive bays

The card plugs into a standard 2.5-inch SATA connector and requires no additional power cable. It lets you reuse an existing M.2 SATA SSD in a laptop or desktop that lacks an M.2 slot. It does not support PCIe-based M-key or M+B-key NVME SSDs such as the Samsung 950PRO, 960EVO or 961.

Sustained SATA III throughput

The adapter passes through SATA revision I, II and III signalling at 1.5, 3.0 and 6.0 Gbps respectively. Performance under sustained load matches the limits of the installed SATA SSD and the host controller. No active cooling or extra drivers are needed for continuous operation.

Highlights

  • Converts M.2 SATA SSDs to 2.5" SATA 6.0 Gbps
  • Works with B key and B+M key M.2 modules
  • Fits 2230 2242 2260 2280 form factors
  • Backwards compatible with SATA 1.5 3.0 Gbps
  • Lowers power draw with efficient M.2 SSD

Specifications

BrandEN-Labs
ModelFor 2.5in SATA drives
Changer TypeM.2 SATA
FeaturesFeatures: Convert an M.2 NGFF SSD into 2.5in SATA (6Gbps) interface M.2 NGFF SSD to 2.5in SATA Adapter Converter supports SATA based B key and B+M Key M.2 SSDs Maximize system speed by adding M.2 SSD performance Reduce overall power consumption, with a high efficiency M.2 SSD Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps) Supports full length M.2 NGFF (Next Generation Form Factor) SSD Solid State Drives (2230, 2242, 2260, 2280) Note: It does NOT support PCI-e Based "M key" or "M+B key" (NVME AHCI) SSD (eg. Samsung 950PRO / Samsung 960EVO / Samsung 961)

Questions about this item

What is the maximum sustained data rate this adapter can handle?

The adapter supports SATA revision I, II and III, so the peak sustained rate is 6.0 Gbps.

Does the adapter generate noticeable heat or noise when used continuously?

It is a passive circuit board with no moving parts, so it runs silently and adds negligible heat beyond the M.2 SSD itself.

Which M.2 SSD key types must I already have for this adapter to work?

You need a SATA-based M.2 SSD with a B key or B+M key; PCIe-based M key or M+B key (NVME) drives are not supported.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.