EN-Labs
EN-Labs KITPSUSW6PX108P 10-port PCIe 6-pin breakout board with 10 cables
A 10-port PCIe 6-pin breakout board with 10 included 18AWG cables supports up to 1600W for GPU mining power supplies
- TypePower Supply Breakout Board Adapter w/ Cable Kit
- Length50CM/ 19.7inch
- Cable Length1.64 ft. (0.50m)
- SpecificationsEn-Labs KITPSUSW6PX108P 10 ports PCIe 6-pin GPU Mining Power
- Connector Number10
- 10-port breakout board powers up to ten GPUs from one supply
- Supports 1600W maximum for high-density mining rigs
- Includes ten 18AWG cables with 6-pin to 6+2-pin connectors
- 50cm cable length fits standard chassis layouts
- Solid-state capacitor filtering stabilises power delivery
10-port PCIe breakout board for server PSUs
This EN-Labs breakout board converts a compatible server power supply into ten PCIe 6-pin outputs for GPU mining rigs. The kit includes ten 18AWG cables that adapt each 6-pin port to a 6+2-pin connector, providing 50 cm of reach per cable. Solid-state capacitors on the board filter the 12 V rail for stable delivery.
Replaces custom wiring or multiple adapter cables
Instead of soldering harnesses or chaining splitters, this single board distributes up to 1600 W across ten ports with factory-crimped cables. The jump is worth it when you are powering six or more graphics cards from a Common Slot supply such as the DPS-1200 or PS-2751 series and want a cleaner, more reliable 12 V distribution.
Verify your PSU model
The board only mates with the specific Common Slot units listed, including DPS-800GB, DPS-1200 variants, PS-2751-5Q and HSTSN-PL12; other server PSUs will not connect. Ensure your chassis has space for the board and 19.7-inch cable runs to each GPU, and that your graphics cards accept 6+2-pin power inputs.
Highlights
- 10-port breakout board powers up to ten GPUs from one supply
- Supports 1600W maximum for high-density mining rigs
- Includes ten 18AWG cables with 6-pin to 6+2-pin connectors
- 50cm cable length fits standard chassis layouts
- Solid-state capacitor filtering stabilises power delivery
Specifications
| Brand | EN-Labs |
|---|---|
| Type | Power Supply Breakout Board Adapter w/ Cable Kit |
| Length | 50CM/ 19.7inch |
| Cable Length | 1.64 ft. (0.50m) |
| Specifications | En-Labs KITPSUSW6PX108P 10 ports PCIe 6-pin GPU Mining Power Supply Breakout Board w/ 10pcs PCIe 6pin to PCIe (6+2) 8pin power cable Measured maximum can support to 1600W power supply, 10 ports graphics card 6pin output. The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. 10pcs UL Listed 18AWG PCIe 6pin to PCIe 8(6+2)pin power cable include,able to withstand greater current and high power appliances, 50CM/19.7 inch in cable length, easy to use and connect This item is Compatible with GPU Mining Power Supply.Supported "Common Slot" Powe |
| Connector Number | 10 |
Questions about this item
What clearance does the 10-port breakout board need inside the case?
The board itself is compact and the cables are 50 cm long, so you only need room for the board plus 19.7 inches of cable routing per GPU.
How do I connect the board to a server PSU and what step is often missed?
Plug the board into the PSU's common-slot edge connector, then attach the 10 PCIe 6-pin cables; the step people forget is seating each 6-pin fully until it clicks.
When should the included 18 AWG cables be replaced?
Replace any cable if the insulation is cracked, the pins are discoloured, or the cable has been run continuously near its 1600 W total rating for extended periods.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114821BTC
In stock
