EN-Labs
EN-Labs Black Aluminium Heatsink 25x25x10mm 5pcs diy cooling
Pack of five black anodised aluminium heatsinks measuring 25 x 25 x 10 mm for cooling CPUs, GPUs and other small components
- ColorBlack
- CompatibilityMotherboard Chipsets
- MaterialAluminium
- FeaturesAnodized Black Aluminum heatsink for Computer General CPU, G
- Dimensions25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
- Cools CPUs and GPUs with 25x25x10mm aluminium fins
- Low 10mm profile fits tight motherboard spaces
- Anodised black surface resists corrosion and aids heat transfer
- Five pieces in one pack for multiple component cooling
- Weighs 30g each for lightweight DIY installations
Five low-profile aluminium heatsinks
This pack supplies five anodised black aluminium fin heatsinks sized at 25 x 25 x 10 mm. They are intended for DIY thermal management on small electronic components. The fins increase surface area to improve passive heat transfer. Each unit weighs 30 g and adhesive must be sourced separately.
Suits hobbyists cooling chipsets
Builders fitting northbridge, southbridge, voltage regulators, power transistors, FETs, ICs or small GPU memory chips will find the footprint convenient. The low 10 mm height fits tight clearances around motherboard circuitry. Anyone needing a mounted fan, pre-applied thermal interface or a larger mass for sustained loads should look elsewhere.
25 x 25 x 10 mm footprint decides fit
The square 25 mm plan area and 10 mm height are the critical dimensions that determine whether the heatsink clears adjacent parts and covers the target die. Verify the component package and surrounding clearance against these figures before ordering.
Highlights
- Cools CPUs and GPUs with 25x25x10mm aluminium fins
- Low 10mm profile fits tight motherboard spaces
- Anodised black surface resists corrosion and aids heat transfer
- Five pieces in one pack for multiple component cooling
- Weighs 30g each for lightweight DIY installations
Specifications
| Color | Black |
|---|---|
| Compatibility | Motherboard Chipsets |
| Material | Aluminium |
| Features | Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Mate |
| Dimensions | 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) |
Questions about this item
Does the 5-piece pack include thermal adhesive, or must I buy it separately?
The pack contains only the five 25 x 25 x 10 mm anodised aluminium heatsinks; thermal adhesive or glue is not supplied and must be purchased separately.
When should I choose these 25 mm square, 10 mm tall sinks instead of a larger or thinner version?
Choose them when the target chip or voltage regulator measures roughly 25 mm per side and the chassis allows a 10 mm stack height; the low profile fits tight spaces around motherboard chipsets, GPU memory or power transistors.
What does the 30 g total weight tell me about thermal capacity once the sinks are installed?
At 30 g for the set, each 25 x 25 x 10 mm finned block adds roughly 6 g of aluminium mass, giving enough thermal inertia to absorb short bursts from chipsets, FETs or small ICs before the fins dissipate the heat.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114708BTC
In stock
