We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 24-pin ATX right-angle adapter with PVC overmold and printed label

EN-Labs

EN-Labs ATX 24Pin 90 Degree Right Angled Adapter internal power cable

SKU CH-W13H-H2KDC

A right-angled ATX 24-pin adapter that reorients the motherboard power connector by 90 degrees for tight chassis clearance

  • Solves tight-chassis clearance with 90° right-angle design
  • Plug-and-play installation needs no software or tools
  • Supports any motherboard ATX 24-pin wiring requirement
  • Durable PVC overmold protects pins and circuitry
  • Compatible with all standard 24-pin ATX power supplies

Right-Angle ATX 24-Pin Adapter

This adapter reorients the motherboard's 24-pin power connector by 90 degrees to the right. It is intended for builders working in limited-height chassis where a straight cable would press against the side panel or interfere with other components. The plug-and-play design requires no software or tools.

Build Integration and Cable Management

The adapter sits between the power supply's 24-pin cable and the motherboard header, redirecting the cable run along the board edge. This frees vertical clearance above the socket, allowing the PSU cable to lie flatter and improving airflow in tight spaces. It supports any standard ATX 24-pin wiring configuration on E-ATX, ATX, and Micro-ATX boards.

Sustained Operation and Safety

The unit uses a multi-layer circuit board with hand-soldered pins encased in a PVC overmould for insulation and strain relief. The supplier notes that installation must be performed step by step with the power cord unplugged for at least 10 seconds to avoid pin shorts and potential motherboard damage. The right-angle geometry maintains a stable connection under continuous load.

Highlights

  • Solves tight-chassis clearance with 90° right-angle design
  • Plug-and-play installation needs no software or tools
  • Supports any motherboard ATX 24-pin wiring requirement
  • Durable PVC overmold protects pins and circuitry
  • Compatible with all standard 24-pin ATX power supplies

Specifications

No published specifications for this item yet.

Questions about this item

Will the 90-degree adapter fit inside my low-profile case without blocking the side panel?

The right-angled board re-routes the 24-pin cable 90 degrees, reducing the depth needed behind the motherboard so it clears tight chassis.

Does the adapter get hot or draw extra power when the system runs continuously?

It is a passive pass-through with hand-soldered pins and PVC overmold; it adds no active components, so heat and power draw stay negligible.

My PSU has a standard 24-pin plug — is anything else required to use this adapter?

No extra parts are needed; the male end plugs into the motherboard and the female end accepts the existing PSU 24-pin connector directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.