EN-Labs
EN-Labs Aluminium Heatsinks 14x14x6mm 5pcs 3M 8810 Tape diy cooling
Five 14×14×6 mm aluminium heat sinks with 3M 8810 adhesive tape cool motherboard chipsets, A4988 drivers, Raspberry Pi and similar small components
- ColorSilver
- CompatibilityMotherboard Chipsets
- MaterialAluminium
- Features5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat tra
- Dimensions14mm x 14mm x 6mm
- Efficient heat dissipation for 3D printer A4988 chipsets
- Pre-applied 3M 8810 tape bonds with pressure only
- 6 W/m-k thermal conductivity ensures reliable cooling
- Aluminium construction fits Raspberry Pi and similar boards
- Compact 14x14x6mm size suits tight component spaces
Compact aluminium heatsinks for chip-level cooling
This pack contains five 14x14x6mm aluminium heatsinks intended for motherboard chipsets, power ICs, LED drivers and single-board computers such as Raspberry Pi. They suit hobbyists and repair technicians who need passive cooling on small surface-mount components.
Pre-applied 3M 8810 tape removes the need
Each heatsink ships with a 3M 8810 thermally conductive pressure-sensitive tape rated at .6 W/m-k. The tape bonds on contact without a cure cycle, conforms to slightly uneven surfaces and provides electrical insulation alongside thermal transfer.
Five pieces cover multiple chips on a single board
The 14mm square footprint fits common stepper-driver chips such as the A4988 and similar-size voltage regulators. Builders needing larger radiators, taller fins or active airflow will find the thermal headroom limited to low-power devices.
Highlights
- Efficient heat dissipation for 3D printer A4988 chipsets
- Pre-applied 3M 8810 tape bonds with pressure only
- 6 W/m-k thermal conductivity ensures reliable cooling
- Aluminium construction fits Raspberry Pi and similar boards
- Compact 14x14x6mm size suits tight component spaces
Specifications
| Color | Silver |
|---|---|
| Compatibility | Motherboard Chipsets |
| Material | Aluminium |
| Features | 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to man |
| Dimensions | 14mm x 14mm x 6mm |
Questions about this item
Will the 3M 8810 adhesive tape need replacing after extended use?
The 3M 8810 tape forms a permanent bond using only pressure; it does not require a heat cure cycle and is designed to remain in place without routine replacement.
What thermal limit does the 0.6 W/m-k conductivity of the 3M 8810 tape impose under continuous load?
The tape's 0.6 W/m-k conductivity governs the heat flow from the chip to the aluminium heatsink, so sustained loads that exceed this transfer rate will cause the component temperature to rise.
How hot do the 14x14x6mm aluminium heatsinks get when running all day on a Raspberry Pi?
The aluminium heatsinks passively dissipate heat from the chip; their temperature will stabilise based on the component's power draw and the 0.6 W/m-k tape's thermal resistance.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114354BTC
In stock
