We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 1-foot 5V 3-pin RGB splitter cables with male-to-male adapter, black finish

EN-Labs

EN-Labs 5VRGBSPL1X2 5V 3-pin AURA RGB 1-to-2 splitter cable 1 ft 2-pack

SKU CH-C1QT-QFYBP

Two 1 ft 5 V 3-pin AURA RGB splitter cables with gender changer adapters let one motherboard header drive two lighting channels synchronously

  • TypeRGB Cable
  • Length1 foot
  • Cable Length1 ft.
  • FeaturesExtend the rare RGB interface on your motherboard to two All
  • Splits one 5 V 3-pin AURA header into two channels
  • Synchronises lighting across two RGB fans or strips
  • 1 ft female-to-female cable reaches nearby headers
  • Includes 3-pin male-to-male gender changer adapter
  • Two cables in the pack for multiple builds

5V 3-pin AURA RGB splitter

This EN-Labs cable splits one motherboard 5V 3-pin AURA RGB header into two female ports so you can run two RGB strips or fans from a single connection. The 1-foot length keeps routing tidy inside the case and a male-to-male gender changer pin is included for header orientation. It is designed exclusively for 5V addressable RGB ecosystems.

Compatibility and limits

Suits builders with a 5V 3-pin AURA header who need to drive two addressable RGB devices in sync. It will not work with 12V 4-pin RGB systems so owners of those platforms must look elsewhere. The motherboard header supplies all power so total attached lighting should stay within the header’s own current budget.

Capacity and headroom

Each header typically delivers up to 15 W at 5 V so the splitter comfortably handles modest LED runs. The supplier suggests keeping total attached strip length under 3.3 ft to avoid voltage drop. If connected devices appear dim the header is overloaded and you should reduce the number of attached LEDs.

Highlights

  • Splits one 5 V 3-pin AURA header into two channels
  • Synchronises lighting across two RGB fans or strips
  • 1 ft female-to-female cable reaches nearby headers
  • Includes 3-pin male-to-male gender changer adapter
  • Two cables in the pack for multiple builds

Specifications

BrandEN-Labs
Model5VRGBSPL1X2
TypeRGB Cable
Length1 foot
Cable Length1 ft.
FeaturesExtend the rare RGB interface on your motherboard to two Allow you to Control 2 channels RGB fans and lightning synchronously 5V 3-pin AURA RGB Lighting extension cable 1FT female to female RGB extension cable, Male to Male pin adapter is incldued Does NOT Compatible with 12V 4pin RGB system Notes: 1. Generally, RGB interface in motherboard can provide at least 5V/3A,15W power to periphery RGB device. The RGB cable no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlaod

Questions about this item

What motherboard header is required for the 5V 3-pin AURA RGB splitter to work?

A 5V 3-pin AURA RGB header on the motherboard is required; the splitter does not work with 12V 4-pin RGB systems.

Can I connect 12V RGB fans or strips to this 5V 3-pin splitter?

No, the splitter is designed for 5V 3-pin AURA RGB devices only and is not compatible with 12V 4-pin RGB systems.

How can I verify the splitter is working correctly after installation?

Both connected RGB channels should light synchronously without dimming; if devices dim, the motherboard header may be overloaded beyond its 15W capacity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.