EN-Labs 5PKSATAIII45CMRD90 5-pack SATA cable UV Red 18 inch 90 degree locking latch
- SATA Data Cable
- UV Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Five SATA III cables with locking latches, 18 inches long in UV green, support 6 Gbps data transfer for internal drives
Style Straight
This pack contains five 18-inch SATA III data cables with straight connectors on both ends. Each cable supports up to 6 Gbps transfer rates and is backward compatible with earlier SATA revisions. The UV green colour helps identify cables inside a crowded case. They connect motherboards or host controllers to internal hard drives, SSDs or optical drives.
Moulded locking latches on every connector prevent accidental disconnection during drive swaps or case moves. The 18-inch length keeps routing tidy without excess slack that can impede airflow. Cables are UL listed and RoHS compliant, meeting standard safety and environmental requirements. No power conductors are included; a separate power connection is required for each drive.
Use this set to refresh ageing cables that cause intermittent detection errors or to equip a new build with matching lengths for RAID arrays. The five-cable quantity covers multi-drive upgrades without buying single units at higher per-unit cost. Builders who need right-angle connectors or longer runs for full-tower layouts will need a different cable style.
| Brand | EN-Lab |
|---|---|
| Model | 5PKSATAIII45CMGN |
| Type | SATA Data Cable |
| Color | UV Green |
| Length | 18" |
| Cable Length | 1.5 ft. |
| Connector Number | 2 |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 18 inch / 45CM Color: UV Green UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 5 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Align each 180-degree connector with the motherboard and drive ports, push until the latch clicks, then tug gently to confirm the lock engaged — skipping that tug leaves the latch unseated.
The locking latches can fatigue after repeated insertions; replace any cable whose latch no longer clicks securely or whose 1.5 ft jacket shows kinks or connector corrosion.
The 18-inch length caps maximum throughput at the attached drive's rating, so sustained speed hits the drive or controller ceiling before the cable itself becomes the bottleneck.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?