EN-Labs
EN-Labs 5.25 to 3.5 / 2.5 SATA SAS hard drive adapter
An anodized aluminium bracket mounts one 3.5 or 2.5 inch SATA or SAS drive into a standard 5.25 inch bay and includes 16 screws with rubber washers
- SpecificationsFits in Standard 5.25 inch Driver Bay and may not fit in cha
- Features2mm Anodized aluminum bracket available in black and blue Fi
- Mounts a 3.5 or 2.5 drive in a 5.25 bay
- Anodized 2 mm aluminum bracket resists vibration and corrosion
- Includes 16 screws and 4 rubber washers for secure installation
- Supports SATA and SAS interfaces on IDE, SATA, SAS drives
- Fits standard 5.25 bays; check custom chassis before ordering
5.25 to 3.5 and 2.5 SATA SAS Adapter
This bracket lets you install a 3.5 inch or 2.5 inch SATA or SAS drive into a standard 5.25 inch drive bay. It suits builders adding extra storage to a desktop or server chassis. The kit includes 16 mounting screws and four rubber washers for secure fitting.
Anodized Aluminium Bracket with Rubber Washers
The 2mm anodized aluminium frame comes in black or blue and holds one drive firmly in place. Four rubber washers help reduce vibration noise during daily operation. Eight screws secure the bracket to the bay and eight more mount the drive to the bracket.
Verify Standard 5.25 Inch Bay Before Ordering
The adapter fits only a standard 5.25 inch bay and may not suit chassis with customised bay dimensions. Check your case specifications to confirm the bay is standard size. Mounting a single drive is recommended for better heat dissipation.
Highlights
- Mounts a 3.5 or 2.5 drive in a 5.25 bay
- Anodized 2 mm aluminum bracket resists vibration and corrosion
- Includes 16 screws and 4 rubber washers for secure installation
- Supports SATA and SAS interfaces on IDE, SATA, SAS drives
- Fits standard 5.25 bays; check custom chassis before ordering
Specifications
| Specifications | Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item. - 1x 3.5 - inch Drive and 1x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation. What's in the Box 4 x Rubber Washer 8 x Mounting Screws included |
|---|---|
| Features | 2mm Anodized aluminum bracket available in black and blue Fits in a 5.25-inch drive bay, and allows the mounting of 1x 3.5- inch drive or 1x 2.5- inch drive Compatible with any 2.5 or 3.5 inch IDE,SATA, or SAS hard drive and solid state disk Four rubber washers and 16 mounting screws included |
| Model | For 2.5in SATA drives |
Questions about this item
Does the 5.25-inch bay adapter support SATA and SAS drives at full speed?
The bracket accepts any 2.5 or 3.5 inch SATA or SAS drive; the interface speed is limited only by the drive and the motherboard port you connect it to.
What clearance does the aluminum bracket need inside a standard 5.25-inch bay?
The 2 mm anodized aluminum frame fits a standard 5.25-inch bay; it will not fit chassis with customised or non-standard bay dimensions.
How do I secure a 3.5-inch drive in the bracket, and which screws go where?
Use the eight included mounting screws to fix the 3.5-inch drive to the bracket, then place the four rubber washers between drive and metal to dampen vibration before sliding the assembly into the bay.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00113914BTC
In stock
