EN-Labs
EN-Labs 3PINSPL310 1-to-3 3-pin fan splitter cable 10 inch
- 3pin fan power spli…
- Black
$5.99
0.00007137BTC
In stock
EN-Labs
EN-Labs 3PINSPL310 3-pin fan power splitter cord 10 inch
Splits one 3-pin fan header into two, adding 10 inches of sleeved reach for case-fan placement
- Type3pin fan power splitter
- ColorBlack
- Length10 inch
- Cable Length25cm
- Connector A3pin fan female
- Connector B3 x 3pin fan male
Style 3pin 1X2
- 3pin 1X2
- 3pin 1X3
- Connect two 3-pin fans to one motherboard header
- 10 inch length gives flexible fan placement
- Black braided sleeve protects wires inside the case
- Fans run at full constant speed
- No PWM control — voltage-only operation
What it is
The EN-Labs 3PINSPL310 is a 10-inch black sleeved cable that splits one 3-pin fan header into two male 3-pin connectors, letting two TX3 fans draw power from a single motherboard or power-supply header. It suits builders adding extra case or CPU cooling without free headers.
Build and daily use
The 25 cm braided jacket protects wires inside the chassis and eases routing around tight corners, while the female end plugs directly onto the board and the two male ends attach to fans for a secure friction fit. Because the splitter lacks PWM circuitry both fans run at full speed whenever the header is energised.
The deciding spec
This adapter does not pass PWM control signals, so fan speed cannot be regulated by the motherboard; buyers who need variable-speed or quiet operation should choose a different solution.
Highlights
- Connect two 3-pin fans to one motherboard header
- 10 inch length gives flexible fan placement
- Black braided sleeve protects wires inside the case
- Fans run at full constant speed
- No PWM control — voltage-only operation
Specifications
| Brand | En-Labs |
|---|---|
| Model | 3PINSPL310 |
| Type | 3pin fan power splitter |
| Color | Black |
| Length | 10 inch |
| Cable Length | 25cm |
| Connector A | 3pin fan female |
| Connector B | 3 x 3pin fan male |
| Connector Number | 4 |
| Features | This TX3 Fan Power Splitter Cable lets you connect two 3-pin (TX3) fans to a single power supply connector, allowing you to optimize your cooling capability without having to upgrade the power supply. Use this 1x2 3-pin motherboard header to power 2 x fans with 3-pin connector. Female end 3-pin header plugs on to motherboard (or 3-pin male connector from power supply), 2 x 3-pin male headers to cooling fans Providing a flexible way to position computer case fans as needed The 3 pin Fan Power Splitter cable offers a connection length of 10 inches, eliminating the need to strain the co |
Other versions of this model
1 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
Does the 3-pin header limit fan speed control compared to a 4-pin PWM header?
Yes — the cable carries only power, ground and tachometer signals, so connected fans run at full voltage and cannot be PWM-regulated by the motherboard.
What clearance does the 10-inch sleeved assembly need behind the motherboard tray?
The braided Y-splitter measures 25 cm end-to-end; allow at least that depth plus room for the two male connectors to seat without bending the sleeve.
Which connector plugs into the motherboard fan header and which go to the fans?
The single 3-pin female header attaches to the motherboard or PSU 3-pin male, while the two 3-pin male headers connect to the case or CPU fans.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114364BTC
In stock
