We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 360mm copper radiator with 12 tubes, 1.06in thick, G1/4 threads, fits three 120mm fans

EN-Labs

EN-Labs 360mm Copper Radiator 12-Tube 1.06in Black

SKU CH-9G55-ED8HB

A 360 mm copper radiator with 12 tubes and 1.06 in thickness, G1/4 threads and room for three 120 mm fans

  • Exceptional cooling from 1.06-inch thick copper radiator
  • Universal G1/4 threads fit any custom loop
  • Three 120mm fans mount for high airflow
  • Copper fins with brass chamber ensure durability
  • Black oxidation paint boosts thermal efficiency

Radiator Specifications

The EN-Labs 360mm copper radiator uses twelve tubes and a 1.06in thick core built from copper fins with a brass water chamber. It accepts three 120mm fans and connects through standard G1/4 threads. The black oxidation coating protects the copper surface while improving thermal efficiency. Rated pressure is 2.5bar.

Mounting and Compatibility

The G1/4 thread pattern fits common fittings used in custom liquid-cooling loops. Fan mounting holes are spaced for three 120mm units, allowing builders to choose high-airflow or low-noise models. Overall dimensions are 15.43 by 4.69 by 1.06 inches, so the unit fits cases designed for a 360mm radiator.

Installation Checklist

Verify that your chassis provides a 360mm mounting location with at least 1.06in of clearance for the radiator body plus the chosen fans. Confirm that your pump, reservoir and tubing use G1/4 threads or that you have suitable adapters. Ensure the loop can operate safely at 2.5bar pressure.

Highlights

  • Exceptional cooling from 1.06-inch thick copper radiator
  • Universal G1/4 threads fit any custom loop
  • Three 120mm fans mount for high airflow
  • Copper fins with brass chamber ensure durability
  • Black oxidation paint boosts thermal efficiency

Specifications

No published specifications for this item yet.

Questions about this item

How often should I flush the copper fins and brass chamber to prevent corrosion?

Flush the loop once a year with distilled water and a non-corrosive biocide; the black oxidation coating on the copper fins resists surface oxidation, so no extra cleaning steps are required.

At what coolant pressure does the 2.5 bar rating become the limiting factor during a long stress test?

The radiator is rated for 2.5 bar; if your pump and reservoir combination pushes sustained pressure above that figure, the brass water chamber and G1/4 threads become the first components at risk.

How loud do three 120 mm fans get when the 1.06 inch thick core runs at full load all day?

The 1.06 inch thickness is optimised for high-airflow, low-noise fans, so three 120 mm units can move the required air at lower RPM, keeping acoustic output modest even during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.