EN-Labs 2IDE2CPIE86 internal power cable, dual Molex 4-pin to PCIe 8(6+2)-pin, 6 inch, 18AWG
- Cable Splitters
- Multi-Color
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Converts two SATA 15-pin PSU connectors into one PCIe 8-pin (6+2) GPU power plug using 18AWG UL-listed copper wire over 8 inches
Style 2x SATA
Cable Length 0.8 Feet
This EN-Labs adapter converts two SATA 15-pin power connectors from a power supply into a single PCIe 8-pin (6+2) connector for a graphics card. It is intended for builders whose PSU lacks a native PCIe power lead but has spare SATA outputs available. The cable carries 12 V DC only and uses 18AWG tinned copper wire rated to UL1007.
Each end is keyed so the connectors fit only one way; press firmly until the latch clicks on both the SATA and PCIe sides. The 8-inch length reaches most GPU positions in standard cases, though tight routing behind a motherboard tray may require careful bending. The 6+2 split on the GPU end lets you use it as either an 8-pin or 6-pin plug without extra adapters.
Verify your power supply can deliver enough current on its 12 V rail through the SATA connectors; each SATA pin is rated for limited amperage, so high-wattage cards may exceed the safe limit. Confirm the graphics card requires only a single 8-pin or 6-pin input, because this cable provides just one PCIe connector. Ensure the PSU has two unused SATA power leads available before ordering.
| Brand | En-Labs |
|---|---|
| Model | 2SATAPCIE8-20CM |
| Type | Cable Splitters |
| Color | Multi-Color |
| Length | 6" - 10" |
| Connector Number | 3 |
| Terminal Gender | Male to Female |
| Features | Dual SATA 15pin to 8 Pin PCI-E Power Lead Cable,can be used for current non-PCI Express 2.0 (8-Pin) Power Supply with that new motherboard that supports a PCI Express 2.0 Video cards. The 8-Pin PCI to 2x SATA Power Cable provides a convenient solution for powering a 8 pin PCIe video graphics card from a PSU without a PCI power connection. PCIe 8(6+2) pin female to 2 x SATA male cable provides a convenient solution for video graphics card power with two SATA connectors for GPU cards that require more power |
| Style | 2x SATA |
| Cable Length | 0.8 ft. |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Check that the PCIe 6+2 connector seats firmly into the graphics card and that the system posts without power-related errors; a multimeter on the yellow wires should read 12V DC under load.
The box contains one 8-inch adapter with two SATA 15-pin male plugs and one PCIe 8-pin (6+2) female plug, built with 18AWG tinned copper UL1007 wire; no extra PSU cable is included.
Use the full 8-pin (6+2) configuration when the graphics card requires an 8-pin PCIe power input; the extra two pins supply the additional 12V lines the card expects.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?