EN-Labs 2SATAPCIE8-20CM Dual SATA to PCIe 8-pin (6+2) Power Cable 8 Inches 18AWG
- Cable Splitters
- Multi-Color
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Converts two Molex 4-pin PSU connectors into one PCIe 8(6+2)-pin GPU plug using 18AWG tinned copper wire rated for 12V DC
Style 2X Molex
Cable Length 0.5 ft.
This EN-Labs cable adapts two Molex 4-pin connectors from a power supply into a single PCIe 8(6+2)-pin plug for a graphics card. It is intended for builders whose PSU lacks native PCIe power leads but has spare Molex headers available. The 6+2 pin design fits both 6-pin and 8-pin GPU sockets. The assembly measures six inches end to end.
The cable uses 18AWG tinned copper wire rated for 12 V DC delivery. Two Molex sources combine to feed one PCIe connector, giving enough headroom for mid-range cards that draw up to the 8-pin specification limit. It will not suit high-end GPUs that require two or three dedicated PCIe cables from the PSU, nor cards needing 12VHPWR connections.
At six inches long the adapter only bridges components that sit close together inside the chassis. The dual Molex pigtail spacing is fixed, so widely separated PSU cables may not both reach. The 6+2 pin end splits for 6-pin or 8-pin use, but the wire gauge and connector count limit total current to what two Molex circuits and 18AWG wire can safely carry.
| Brand | EN-Labs |
|---|---|
| Model | 2IDE2CPIE86 |
| Type | Cable Splitters |
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Wire Gauge: 18AWG Tinned Copper Cable Length: 6 inch Connector A: 2 x molex 4pin Connector B: 8-pin(6+2) PCIe female Voltage:12V DC |
| Connector Number | 3 |
| Terminal Gender | Male to Female |
| Features | Dual Molex 4pin IDE to 8 Pin PCI-E Power Lead Cable, can be used for current non-PCI Express 2.0 (8-Pin) Power Supply with that new motherboard that supports a PCI Express 2.0 Video cards. The 8-Pin PCI to 2x Molex Power Cable provides a convenient solution for powering a 8 pin PCIe video graphics card from a PSU without a PCI power connection. PCIe 8(6+2) pin female to 2 x molex male cable provides a convenient solution for video graphics card power with two Molex connectors for GPU cards that require more power |
| Style | 2X Molex |
| Cable Length | 0.5 ft. |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The cable is 6 inches long, so measure from your PSU Molex headers to the GPU slot before ordering.
The GPU should power on normally and show no missing-power warnings in the BIOS or driver control panel.
Both Molex 4-pin plugs and the 6+2 PCIe female connector are pre-assembled on the single 18AWG cable.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?