We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PMMA case hub with magnetic standoffs, eight ARGB and PWM ports, SATA power

EN-Labs

EN-Labs 2-in-1 ARGB PWM Hub 8 Ports SATA Powered

SKU CH-TYSD-SRKN9

A 2-in-1 hub connects up to eight 5 V addressable RGB devices and eight 12 V PWM fans from a single SATA power source, with magnetic standoffs for easy case mounting

Style 3 Pin

  • Controls 8 ARGB devices from one motherboard header
  • Powers 8 PWM fans via SATA to reduce motherboard load
  • Magnetic standoffs secure the hub inside any chassis
  • PMMA case protects circuitry from damage
  • Built-in chipset runs lighting effects without motherboard RGB support

2-in-1 ARGB PWM Hub

This EN-Labs hub combines eight 5 V addressable RGB headers and eight 12 V PWM fan headers in one SATA-powered unit. It draws power directly from the power supply, reducing load on the motherboard. A built-in RGB controller chip runs lighting effects automatically when no motherboard sync cable is attached. The PMMA case and magnetic standoffs simplify installation inside the chassis.

Builders expanding lighting and cooling

Suits builders who need to connect multiple 5 V ARGB strips or fans and 12 V PWM fans to a single motherboard header. Not for systems using 12 V 4-pin RGB components, as the hub only supports 5 V 3-pin addressable devices. Users without a spare SATA power connector from the PSU will need a different solution.

Eight ARGB and eight PWM ports

The hub comfortably handles up to eight addressable RGB devices and eight PWM fans simultaneously, with all ARGB channels synced to one signal. Headroom ends when more than eight of either device type are required, or when the PSU lacks an available SATA 15-pin connector to power the unit.

Highlights

  • Controls 8 ARGB devices from one motherboard header
  • Powers 8 PWM fans via SATA to reduce motherboard load
  • Magnetic standoffs secure the hub inside any chassis
  • PMMA case protects circuitry from damage
  • Built-in chipset runs lighting effects without motherboard RGB support

Specifications

No published specifications for this item yet.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What power connector from the PSU is required for the SATA 15pin input?

A standard SATA power cable from the PSU plugs into the 15pin connector to supply both the fans and ARGB devices.

Can the eight 12V 4pin PWM fan headers run older 3pin DC fans?

The hub provides eight 12V 4pin PWM headers; 3pin DC fans will receive constant 12V and run at full speed without speed control.

How do I confirm the ARGB sync is active after connecting the 3pin cable to the motherboard?

When the 3pin ARGB cable is attached to a 5V motherboard header, the connected strips and fans automatically mirror the board's RGB software effects.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.