We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black USB dongle with a flat rectangular body

EN-Labs

EN-Labs 150Mbps USB 2.0 2.4GHz WiFi Adapter

SKU CH-CGMD-63AZ4

Adds 2.4 GHz wireless networking at up to 150 Mbps via USB 2.0 with driverless setup and soft AP hotspot mode

  • Driverless setup works instantly on Windows XP through 11 and Mac OS
  • Up to 150 Mbps wireless speed using 802.11n at 2.4 GHz
  • Backwards compatible with 802.11g and 802.11b networks for broader router support
  • WEP, WPA, WPA2 and PSK encryption keep the connection secure
  • Soft AP mode turns a wired PC into a Wi-Fi hotspot

Plug-and-play USB 2.0 Wi-Fi adapter

The EN-Labs dongle adds 2.4 GHz wireless networking to any desktop or laptop with a spare USB 2.0 port. No driver installation is required on supported systems, so the device is ready to use moments after insertion. It suits users who need a simple way to connect older hardware or machines lacking built-in Wi-Fi.

Low-power 2.4 GHz operation

The adapter draws power directly from the USB bus and runs cool during typical web browsing or streaming. Maximum RF output is 20 dBm, keeping signal strength adequate for indoor use without generating noticeable heat. Power consumption remains modest because the radio operates only on the 2.4 GHz band at up to 150 Mbps.

Turns a wired link into a hotspot

Soft AP mode lets the dongle share an existing Ethernet connection as a Wi-Fi access point for phones, tablets or other devices. It works with Windows XP through 11 and Mac OS, so a single wired port can serve multiple wireless clients. The stick occupies one USB 2.0 socket and adds no cables or external antennas to the build.

Highlights

  • Driverless setup works instantly on Windows XP through 11 and Mac OS
  • Up to 150 Mbps wireless speed using 802.11n at 2.4 GHz
  • Backwards compatible with 802.11g and 802.11b networks for broader router support
  • WEP, WPA, WPA2 and PSK encryption keep the connection secure
  • Soft AP mode turns a wired PC into a Wi-Fi hotspot

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the USB 2.0 2.4GHz WiFi dongle without the driver CD?

Plug the dongle into any USB 2.0 port; the driverless design lets Windows XP through 11 and Mac OS load the driver automatically, then join your 2.4 GHz network — the step many miss is selecting the correct SSID on channel 1‑13 before testing speed.

What part will need attention after months of daily use?

The USB 2.0 connector and internal 802.11n radio are solid‑state, so only the external casing or port lint can degrade; keep the port clean and reseat the dongle if throughput drops below the rated 150 Mbps.

What limit appears first during a long file transfer at 2.4 GHz?

The USB 2.0 bus caps sustained throughput well under the 150 Mbps 802.11n ceiling, so the bus bandwidth becomes the bottleneck before the radio or thermal limits are reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.