EN-Labs
EN-Labs 15.7 Inch 4pin TX4 PWM Fan Power Extension Cable
A 15.7 inch PWM fan power extension cable with 24AWG copper conductors and black net jacket sleeving for 4-pin and 3-pin fans
- TypePower
- Length11" - 15"
- SpecificationsType :PWM fan power extension cable Length: 12 inches Conduc
- Connector Number2
- Terminal GenderMale to Female
- FeaturesPWM fan power extension cable designed to solve the problem
- Extends fan reach by 15.7 inches for large chassis
- 20AWG copper conductor ensures reliable 12V/5V power delivery
- Black net jacket sleeve improves cable management aesthetics
- Male-to-female TX4 connectors support PWM speed control
- Works with both 4-pin and 3-pin fan headers
Extension cable for PWM fans
This 15.7 inch PWM fan power extension cable adds reach between a motherboard or controller header and a 4-pin fan. It suits builders who need extra length in a large chassis or a complex cable layout. The black net-jacket sleeving keeps the run tidy inside the case.
15.7 inch length with 24AWG copper
The cable measures 15.7 inches and uses 24AWG copper conductors for the power and signal lines. A 4-pin TX4 male connector plugs into the fan header while a 4-pin TX4 female connector accepts the fan plug. Both 12 V and 5 V PWM fans are supported.
Works with 3-pin and 4-pin fans
The female header accepts standard 3-pin and 4-pin fan connectors, so older 3-pin fans can also be extended. No software or additional adapters are bundled with the cable. The sleeved jacket is the only included accessory.
Highlights
- Extends fan reach by 15.7 inches for large chassis
- 20AWG copper conductor ensures reliable 12V/5V power delivery
- Black net jacket sleeve improves cable management aesthetics
- Male-to-female TX4 connectors support PWM speed control
- Works with both 4-pin and 3-pin fan headers
Specifications
| Type | Power |
|---|---|
| Length | 11" - 15" |
| Specifications | Type :PWM fan power extension cable Length: 12 inches Conductor:20AWG Copper Connector A:1x 4pin PWM Fan TX4 male Connector B: 1x 4pin PWM Fan TX4 female Power supports:12V/5V fans 3-PIN & 4-PIN fan compatible |
| Connector Number | 2 |
| Terminal Gender | Male to Female |
| Features | PWM fan power extension cable designed to solve the problem of short-cabled PWM fan in a large chassis or in a complex arrangement. Extend your existing 4-pin fan connection by an additional 12 inches Compatible with 4pin PMW fan connector and 3pin fan connector Sleeved in a black is enhanced cable management,enclosure to provide a sleeker look that seamlessly integrates into the case's interior In addition, it provides enthusiasts seeking optimal thermal performance with a better solution for cable management. |
Questions about this item
How much extra reach does the 15.7 inch length add for a PWM fan in a large case?
The cable extends an existing 4‑pin fan connection by 15.7 inches, letting you route the fan to distant headers in big chassis or complex layouts.
What does the TX4 4‑pin PWM interface support in practice?
It carries 12 V and 5 V power plus the PWM control signal, works with both 4‑pin and 3‑pin fans, and uses 20 AWG or 24 AWG copper conductors.
What clearance is needed for the black net‑jacket sleeve and connectors?
The sleeved cable is flexible for tight routing; each end has a standard 4‑pin TX4 male or female connector that fits regular fan headers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114814BTC
In stock
