We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR 180-degree angled adapter with aluminum shell, male to female 12+4pin connector

EN-Labs

EN-Labs 12VHPWR 180 Degree Angled Adapter Type A internal power cable

SKU CH-H5ZC-9FGEM

A 180-degree angled 12VHPWR adapter connects an ATX 3.0 PCIe 5.0 power cable to RTX 3090 Ti, 4070 Ti, 4080 or 4090 graphics cards, supports up to 600 W and adds only .28 inches of clearance

  • ColorBlack

Style Down Angle

  • Angled design reduces cable strain on GPU port
  • 180 degree orientation adds clearance for tight cases
  • Aluminum shell improves heat dissipation under load
  • Rated for 600W delivery to high-end cards
  • Type A layout matches specific RTX backplate orientation

12VHPWR Type A angled adapter

This EN-Labs adapter converts a straight 12VHPWR cable into a 180-degree connection for RTX 3090 Ti 4070 Ti 4080 and 4090 graphics cards. The aluminium shell aids heat dissipation while supporting up to 600W delivery. It adds only .28 inches of clearance beyond the GPU bracket.

Upgrade from a straight 12VHPWR plug

A straight connector can press against a side panel or bend the cable sharply especially in compact cases. This 180-degree Type A version redirects the cable along the backplate reducing strain on the port and the cable itself. The improvement is worthwhile when the backplate sits within 3mm of the connector housing.

Fits builds with tight side-panel clearance

The low-profile .28-inch protrusion lets wide graphics cards fit in narrower chassis without removing the side panel. You need a 12VHPWR cable rated for 600W and a GPU whose 12+4 pin port matches the Type A orientation shown in the product images. Builders whose backplate extends more than 3mm past the port cannot use this adapter.

Highlights

  • Angled design reduces cable strain on GPU port
  • 180 degree orientation adds clearance for tight cases
  • Aluminum shell improves heat dissipation under load
  • Rated for 600W delivery to high-end cards
  • Type A layout matches specific RTX backplate orientation

Specifications

ColorBlack

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much clearance does the 180 degree 12VHPWR adapter add between the GPU and side panel?

The adapter protrudes 0.28 inches from the graphics card, creating extra space for wider cards in narrower chassis.

Which way should the Type A 12VHPWR adapter face when plugging into an RTX 4090?

Align the adapter so the cable routes toward the backplate side; verify orientation against the product image before inserting.

When should the aluminum 12VHPWR adapter be replaced?

Replace it if the aluminum shell shows deformation, the 16-pin connector feels loose, or you upgrade to a GPU needing a different adapter type.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.