EN-Labs
EN-Labs 12V 4-Pin RGB 3-Way Splitter Cable 1 ft 2 Pack
Two 1-foot 12 V 4-pin RGB splitter cables divide one motherboard header into three channels with an included gender changer
- TypeRGB Cable
- Length1 foot
- Cable Length1 ft.
- FeaturesExtend the rare RGB interface on your motherboard to four Al
- Split one motherboard header into three RGB channels
- 12 V 4-pin AURA RGB compatibility only
- One-foot female-to-female cables for tidy routing
- Male-to-male gender changer included for flexible connections
- Two-pack value for multi-fan or strip setups
12 V 4-pin RGB splitter kit
This pair of cables turns a single motherboard 12 V 4-pin AURA header into three female ports so you can run three RGB fans or strips in sync. The included male-to-male gender changer lets you plug the splitter directly into the board without an extra adapter.
Capacity and headroom
The motherboard header typically supplies 12 V at 1 A for about 12 W total, so the three outputs share that budget. Runs longer than 3.3 ft or too many devices will cause dimming, signalling the header is overloaded.
Build and daily use
Female-to-female ends and the supplied gender changer give a secure, keyed connection when the arrow on each plug aligns with the 12 V mark on the board. The one-foot length keeps cable routing tidy inside compact cases. This kit does not support 5 V 3-pin addressable RGB systems.
Highlights
- Split one motherboard header into three RGB channels
- 12 V 4-pin AURA RGB compatibility only
- One-foot female-to-female cables for tidy routing
- Male-to-male gender changer included for flexible connections
- Two-pack value for multi-fan or strip setups
Specifications
| Brand | EN-Labs |
|---|---|
| Model | 12VRGBSPL1X3 |
| Type | RGB Cable |
| Length | 1 foot |
| Cable Length | 1 ft. |
| Features | Extend the rare RGB interface on your motherboard to four Allow you to Control 3 channels RGB fans and lightning synchronously 12V 4-pin AURA RGB Lighting extension cable 1FT female to female RGB extension cable, Male to Male pin adapter is incldued Does NOT Compatible with 5V 3pin RGB system Notes: 1. Generally, RGB interface in motherboard can provide at least 12V/1A,12W power to periphery RGB device. The RGB cable no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overla |
Questions about this item
Will the 12V 4-pin AURA RGB splitter work with my older 5V 3-pin addressable RGB fans?
No, the splitter is designed for 12V 4-pin AURA RGB devices only and does not work with 5V 3-pin RGB systems.
How can I verify the 1 ft splitter cables are connected correctly after installation?
Ensure the arrow mark on each plug aligns with the 12V pin on the motherboard header and confirm all three connected channels light synchronously.
Does the 2-pack include the male-to-male gender changer adapters or must I buy them separately?
Each pack includes a 4-pin male-to-male gender changer pin, so no separate purchase is required for the adapter.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
