EN-Labs
EN-Labs 11-001-405 2 Port SATA to eSATAp Data Adapter with Full Profile Bracket
Adds two eSATAp ports via internal SATA and USB 2.0 headers with 12V/5V power output
- TypeNo
- FeatureseSATAp (also known as Power over eSATA, Power eSATA, eSATA/U
- Package Contents1 X Adapter Card 1 X USB 2.0 9Pin Header-9pin Header Cable,3
- Add two eSATAp ports from internal SATA
- External drives powered by 12V and 5V from PSU
- USB 2.0 data up to 480 Mbps via motherboard header
- Full-profile bracket fits standard desktop cases
- Plug-and-play operation with no driver required
Internal to External Storage Adapter
This EN-Labs adapter converts two internal SATA connections into external eSATAp ports using a full-profile bracket. It targets desktop builders who need to connect eSATA or USB 2.0 storage devices outside the case without adding a controller card.
Power and Host Requirements
Each eSATAp port supplies 12V and 5V power for 2.5 or 3.5 drives, but the included SATA 15-pin to 4-pin cable must be connected to the power supply. USB 2.0 data up to 480 Mbps only works when the 30 cm 9-pin header cable is linked to a motherboard USB header.
Two SATA Cables Are Mandatory
The adapter provides no storage bandwidth of its own; it simply passes signals from two host SATA ports. Without two separate SATA cables (not included) running from the motherboard or controller to the card, neither eSATAp port can function.
Highlights
- Add two eSATAp ports from internal SATA
- External drives powered by 12V and 5V from PSU
- USB 2.0 data up to 480 Mbps via motherboard header
- Full-profile bracket fits standard desktop cases
- Plug-and-play operation with no driver required
Specifications
| Brand | En-Labs |
|---|---|
| Model | 11-001-405 |
| Type | No |
| Features | eSATAp (also known as Power over eSATA, Power eSATA, eSATA/USB Combo, eSATA USB Hybrid Port/EUHP) is a combination connection for external storage devices. An eSATA or USB device can be plugged into an eSATAp port.Power eSATA is eSATA + USB combo, NOT eSATA or USB port Expand two eSATAp port from your SATA host Provide 12V/5V power over the external port( SATA 15pin to SP4 4pin power adapter cable MUST be connected ) for any eSATA device The 9pin header on this board must be connected with a 9pin header on your motherboard to make sure the eSATAp have USB 2.0 functions No driver need |
| Package Contents | 1 X Adapter Card 1 X USB 2.0 9Pin Header-9pin Header Cable,30cm 1 X SATA to molex LP4 4Pin Power Adapter Cable,20cm |
Questions about this item
Should I choose this 2-port eSATAp adapter or a single-port version?
This model provides two eSATAp ports from a single bracket, letting you connect two external drives simultaneously; a single-port card would only support one.
What does the 480 Mbps figure mean when I plug in a drive?
That is the maximum USB 2.0 data rate available through the 9-pin header connection; actual throughput will be lower due to protocol overhead.
Which interface does the eSATAp port use and what does it limit?
The port combines eSATA and USB 2.0; eSATA speed depends on the host controller, while USB traffic is capped at 480 Mbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
