Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Pack of ten 20 x 20 x 1.2 mm copper shims rated at 401 W/m·K for BGA CPU, GPU and memory cooling in consoles and laptops
This pack contains ten copper shims measuring 20 by 20 by 1.2 millimetres. They are intended for DIY cooling on BGA processors, graphics chips and memory modules in laptops, Xbox 360, PlayStation 2, 3 and 4 consoles. The shims bridge gaps between dies and heatsinks where thermal paste alone is insufficient.
Each shim offers a stated thermal conductivity of 401 watts per metre-kelvin, far above the 20 to 30 watts per metre-kelvin of ordinary copper. The thin 1.2 millimetre profile suits tight clearances in laptop GPUs and console processors, but the fixed thickness cannot compensate for larger gaps or warped heatsinks.
The single deciding specification is the 1.2 millimetre height. If your repair needs a thinner or thicker spacer, these shims will not fit. They are sold as a ten-piece lot with no additional sizes included.
| Compatibility | CPU |
|---|---|
| Material | Copper |
| Features | This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as H |
| Dimensions | 20mm x 20mm x 1.2mm |
Each shim measures 20 mm by 20 mm and is 1.2 mm thick, a common gap size for many laptop BGA CPUs and GPUs; verify the exact clearance on your board before installing.
Reassemble the system, run a sustained load and monitor core temperatures; a noticeable drop compared with the previous thermal pad indicates the copper shim is conducting heat as intended.
The shims are bare copper; you will need a thin layer of thermal compound on each face to fill microscopic gaps, and no adhesive or paste is included in the lot.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?