We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Elpida Memory, Inc

Elpida Memory 1GB DDR2 PC5300 667MHz SODIMM laptop RAM

SKU CH-GJRC-87ANH

1GB DDR2 SODIMM laptop module running at 667MHz PC5300 with 1.8V unbuffered operation

  • Capacity1GB
  • 1GB capacity upgrades older laptops
  • DDR2 PC5300 667MHz matches legacy specifications
  • Unbuffered 1.8V design reduces power draw
  • 2Rx16 organisation with 64M×16 chips enables efficient access
  • 200-pin SODIMM form factor fits standard notebook slots

Single 1GB DDR2 SODIMM module

This is a new Elpida Memory 1GB DDR2 PC5300 SODIMM built for laptop upgrades. It runs at 667MHz with CL5 timing and operates at 1.8v. The unbuffered module uses a 200-pin interface and a 2Rx16 organisation based on 64Mx16 chips.

Suits owners repairing legacy DDR2 notebooks

It fits systems that specifically require PC5300 unbuffered SODIMMs at 1.8v. Builders needing more than 1GB per slot, different voltage requirements or alternative memory technologies should look elsewhere.

1GB capacity per module

The single 1GB density decides whether this part matches the slot limit and total memory target of the target notebook. Verify the maximum supported capacity per slot before purchase.

Highlights

  • 1GB capacity upgrades older laptops
  • DDR2 PC5300 667MHz matches legacy specifications
  • Unbuffered 1.8V design reduces power draw
  • 2Rx16 organisation with 64M×16 chips enables efficient access
  • 200-pin SODIMM form factor fits standard notebook slots

Specifications

Capacity1GB

Questions about this item

What speed does the DDR2 PC5300 667MHz interface actually run at?

The module operates at 667 MHz with a PC5300 bandwidth rating and CL5 latency.

What physical slot and pin count does this SODIMM require?

It uses a 200-pin SODIMM slot and measures 128M x 64 with 64M x 16 chips in a 2Rx16 layout.

How is the module installed and what voltage must the laptop supply?

Insert at an angle into the 200-pin socket until the clips lock; the board must provide 1.8 V for this DDR2 stick.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.