We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with terminal blocks and status LEDs

ELENE

ELENE LNL-1200 16-output RS-485 control module cpu accessory

SKU CH-S08R-X579V MPN LNL-1200

16-output RS-485 control module with 12 or 24 VDC power, 5 A Form-C relays and AES encryption for up to 128 floors

  • 16 Form-C relay outputs switch loads up to 5 A at 30 VDC
  • RS-485 multidrop link supports 2-wire or 4-wire cabling
  • Operates from 12 or 24 VDC supply drawing 500 mA
  • Two dedicated inputs monitor cabinet tamper and UPS fault status
  • AES 128-bit or 256-bit encryption available with compatible controller

16-output RS-485 control module for access systems

The ELENE LNL-1200 is an output control module designed for integration with intelligent system controllers in access control installations. It provides sixteen Form-C relay contacts rated at 5 A and 30 VDC for switching a variety of loads. The module connects to the host via a multidropped RS-485 bus using either two-wire or four-wire cabling.

Simple addressing and wiring with on-board jumpers

Installation uses DIP switches to set the module address and on-board termination jumpers to match the bus topology. Status LEDs show host communication, heartbeat and relay state for quick verification. The unit accepts 12 or 24 VDC supply power and draws 500 mA. Two dedicated unsupervised inputs monitor cabinet tamper and UPS fault conditions.

Sixteen relays per module

A single module handles sixteen independently switched outputs, and up to sixteen modules can share one RS-485 line under one controller. The firmware supports elevator control for up to 128 floors. AES 128-bit or 256-bit encryption is available depending on the controller and software version. The module is rated for operation from 0 to 70 °C.

Highlights

  • 16 Form-C relay outputs switch loads up to 5 A at 30 VDC
  • RS-485 multidrop link supports 2-wire or 4-wire cabling
  • Operates from 12 or 24 VDC supply drawing 500 mA
  • Two dedicated inputs monitor cabinet tamper and UPS fault status
  • AES 128-bit or 256-bit encryption available with compatible controller

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the LNL-1200 is communicating correctly after wiring the RS-485 bus?

Watch the on-board status LEDs; they show host communication, heartbeat and individual relay state so you can verify operation at a glance.

What ships with the LNL-1200 and what must I source separately?

The module itself is supplied; you must provide 12 or 24 VDC power, RS-485 cabling and any field devices you intend to switch through the 16 Form-C outputs.

Which LNL-1200 variant should I select for a 128-floor elevator system?

The single LNL-1200 supports up to 128 floors, so one unit covers the full range; choose it when you need that capacity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.