We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular black driver unit with cable leads

Elemental LED

Elemental LED OMNIDRIVE 10W 24V Ballast

SKU CH-ZXZ3-BS1FH

Dimmable 10 W 24 V driver works with TRIAC, MLV, ELV and incandescent dimmers for smooth 100 % to 10 % dimming

  • typeBallasts
  • Dims smoothly to 10 % with built-in electronic filter
  • Works with TRIAC, MLV, ELV and incandescent dimmers
  • 10 W output at 24 V for LED strips
  • OMNIDRIVE driver covers widest dimmer selection
  • California Prop 65 warning for reproductive-harm chemical

10W 24V OMNIDRIVE Ballast

This 10W 24V OMNIDRIVE ballast powers compatible LED tape or fixtures. It is built for installers and homeowners who need reliable dimming from a single driver. The electronic design supports a broad range of dimmer types. It delivers consistent output for accent and task lighting projects.

Check voltage and dimmer compatibility

Verify that your LED load runs on 24V and does not exceed 10W total draw. Confirm the dimmer switch is TRIAC, MLV, ELV or incandescent/halogen type for proper operation. Ensure the wiring environment suits an electronic driver. The unit carries a California Proposition 65 notice for reproductive-harm chemicals.

Built-in filter removes flicker

The integrated electronic filter eliminates flicker and enables smooth dimming from 100% down to 10%. This means no separate filtering components are required during installation. Multi-way and simple on/off switching are also supported without extra hardware. The driver ships directly from the manufacturer.

Highlights

  • Dims smoothly to 10 % with built-in electronic filter
  • Works with TRIAC, MLV, ELV and incandescent dimmers
  • 10 W output at 24 V for LED strips
  • OMNIDRIVE driver covers widest dimmer selection
  • California Prop 65 warning for reproductive-harm chemical

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

Does the OMNIDRIVE 10W 24V ballast include mounting hardware or wiring accessories?

The driver is supplied as a standalone unit; mounting brackets, wire connectors and low-voltage cable must be purchased separately.

How do I decide between the 10W model and a higher-wattage OMNIDRIVE driver?

Add the wattage of every 24V LED strip or fixture you plan to run from one driver; if the total is 10W or less this model is sufficient, otherwise choose a larger capacity unit.

What does the 100% to 10% dimming range mean when the driver is installed?

Compatible TRIAC, MLV or ELV dimmers can reduce light output smoothly from full brightness down to roughly one-tenth without flicker.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.