We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular junction box with integrated driver, matte grey finish, wet-location rated

Elemental LED

Elemental LED DI-TD-24V-10W-LPS3R LO-PRO Wet Loc Jct Box Driver Combo 24V

SKU CH-C8NR-MEVA5

A 24 V, 10 W dimmable LED driver housed in a NEMA 3R wet-location junction box certified to UL 2108, UL 508A and UL 1598

  • typeBallasts
  • Smooth dimming from 100% down to 10% with OMNIDRIVE electronic driver
  • Compatible with TRIAC, MLV, ELV and incandescent dimmer switches
  • NEMA 3R junction box rated for wet locations and outdoor use
  • Certified to UL 2108, UL 508A and UL 1598 safety standards
  • 10 W output at 24 V for low-voltage LED installations

24V 10W Wet-Location Driver Kit

This Elemental LED combo pairs a 10W OMNIDRIVE dimmable driver with a LO-PRO NEMA 3R junction box rated for wet locations. The driver operates on a 24V output and supports smooth dimming from 100% down to 10% without flicker. It is designed for installers who need a compact, weather-protected power supply for low-voltage LED lighting in outdoor or damp indoor environments. The unit carries UL 2108, UL 508A, and UL 1598 certifications for power-supply and luminaire safety.

Installation and Common Issues

The NEMA 3R enclosure provides a sealed mounting point that simplifies wiring in exposed areas, but the compact LO-PRO profile leaves limited space for wire nuts and bends inside the box. Electricians should verify conduit entry locations before cutting holes, as the small footprint restricts rework. The driver accepts TRIAC, MLV, ELV and incandescent/halogen dimmers, yet mixing dimmer types on the same circuit often causes unexpected flicker or reduced dimming range. California Proposition 65 applies because the product contains a listed chemical.

Pre-Order Compatibility Checks

Confirm that the LED load requires exactly 24V constant-voltage input and does not exceed 10W total draw. Ensure the chosen dimmer switch is rated for electronic low-voltage or magnetic low-voltage loads and is compatible with the driver’s 10% minimum dimming threshold. Verify that the installation site can accommodate a NEMA 3R surface-mount box and that local code accepts UL 2108, UL 508A, and UL 1598 listings for the intended application.

Highlights

  • Smooth dimming from 100% down to 10% with OMNIDRIVE electronic driver
  • Compatible with TRIAC, MLV, ELV and incandescent dimmer switches
  • NEMA 3R junction box rated for wet locations and outdoor use
  • Certified to UL 2108, UL 508A and UL 1598 safety standards
  • 10 W output at 24 V for low-voltage LED installations

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How can I confirm the OMNIDRIVE driver is dimming smoothly after installation?

Watch the connected LED load dim from 100% down to 10% without flicker when using a compatible TRIAC, MLV, ELV or incandescent/halogen dimmer.

What components are included and what must I supply separately?

The combo includes the LO-PRO NEMA 3R junction box and the 10W 24V OMNIDRIVE dimmable driver; you must provide the low-voltage LED load, line-voltage wiring and a compatible dimmer switch.

Which certifications apply to the junction-box-and-driver combo?

The assembly is certified to UL 2108, UL 508A and UL 1598 for wet-location protection of the power supply and electrical components.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.