Elemental LED
Elemental LED DI-TD-12V-30W-LPS3R LO-PRO Wet Loc Jct Box Driver Combo ballast
A 12V 30W dimmable LED driver in a NEMA 3R junction box for wet locations
- typeBallasts
- Smooth dimming from 100% down to 10% with OMNIDRIVE electronic filter
- Compatible with TRIAC, MLV, ELV and incandescent dimmer switches
- Weatherproof NEMA 3R junction box rated for wet locations
- UL 2108, UL 508A and UL 1598 certified for outdoor safety
- 12 V, 30 W driver designed and engineered in Reno, Nevada
12V 30W OMNIDRIVE Driver with NEMA 3R Junction Box
This combination pairs a 12V OMNIDRIVE electronic dimmable driver rated at 30W with a LO-PRO NEMA 3R wet-location junction box. It is built for LED installations that require protected power and smooth dimming in damp or outdoor environments.
Upgrading from non-dimmable
The OMNIDRIVE driver replaces basic transformers by adding flicker-free dimming from 100% down to 10% across TRIAC, MLV, ELV and incandescent dimmer types. The integrated NEMA 3R enclosure replaces open wiring boxes, adding UL 2108, UL 508A and UL 1598 certified protection against weather and environmental hazards in a single step.
Installers needing certified wet-location dimming
This combo suits electricians and contractors who must meet code for outdoor or damp-area LED runs while delivering compatible dimming performance. Projects that require higher wattage, a different voltage, or a non-dimmable constant-current supply should look at alternative driver configurations.
Highlights
- Smooth dimming from 100% down to 10% with OMNIDRIVE electronic filter
- Compatible with TRIAC, MLV, ELV and incandescent dimmer switches
- Weatherproof NEMA 3R junction box rated for wet locations
- UL 2108, UL 508A and UL 1598 certified for outdoor safety
- 12 V, 30 W driver designed and engineered in Reno, Nevada
Specifications
| Brand | DIODE LED |
|---|---|
| type | Ballasts |
Questions about this item
What size junction box opening does the NEMA 3R enclosure require for mounting?
The LO-PRO NEMA 3R junction box is designed for wet-location mounting and is certified to UL 508A and UL 1598 for outdoor enclosure protection.
How do I wire the OMNIDRIVE driver for TRIAC dimming without causing flicker?
Connect the 12V driver to a compatible TRIAC, MLV, ELV or incandescent dimmer; the built-in electronic filter eliminates flicker and enables smooth dimming from 100% down to 10%.
When should the 30W driver be replaced if the LEDs start dimming unevenly?
The driver is rated for 30W maximum load; uneven dimming typically indicates the driver has reached end of life and should be replaced to restore full 100% to 10% dimming range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



