We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black metal box with side wiring terminals

Elemental LED

Elemental LED DI-CV-MW12V60W-277 12V 60W 120-277V ballast

SKU CH-P02V-5K20B

Supplies 12 V DC at 60 W from a 120-277 V AC input for low-voltage LED lighting

  • typeBallasts
  • Commercial-grade driver built for professional lighting installations
  • 60 W output powers extended low-voltage LED runs
  • 12 V DC constant voltage matches strip and module requirements
  • 120–277 V AC input works on standard and commercial circuits
  • Compatible with 120 V switches and low-voltage dimmers

What This Ballast Is

The Elemental LED DI-CV-MW12V60W-277 is a commercial-grade constant voltage driver that delivers 12V DC at 60W from a 120-277V AC supply. It is built for installers who need a hard-wired power source for low-voltage LED tape, modules or fixtures in retail, hospitality or architectural projects. Buyers who want a dimmable driver with an integrated wireless controller or a plug-and-play adapter should look elsewhere.

Installation Notes

The unit is hard-wired on both the line-voltage input and the low-voltage output, so a qualified electrician should make the connections inside a suitable junction box. Because it accepts a wide 120-277V range, it can be used on standard North American circuits or higher-voltage commercial panels without re-wiring. The most common error is exceeding the 60W limit by adding too much LED load, which triggers the protection circuit and shuts the driver down.

The Spec That Decides Fit

The single figure that determines compatibility is the 12V DC constant-voltage output; your LED product must be rated for exactly 12 volts and must not draw more than 60 watts in total. If the lighting system requires a different voltage, a constant-current driver, or a higher wattage, this ballast will not work.

Highlights

  • Commercial-grade driver built for professional lighting installations
  • 60 W output powers extended low-voltage LED runs
  • 12 V DC constant voltage matches strip and module requirements
  • 120–277 V AC input works on standard and commercial circuits
  • Compatible with 120 V switches and low-voltage dimmers

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How do I verify the 12V DC constant voltage driver is delivering the correct output after installation?

Measure the output terminals with a multimeter set to DC volts; it should read 12 V under load.

What components are included and what must be purchased separately for the 60 W 120-277 V AC unit?

The driver itself is supplied; supply wiring, low-voltage LED load and any dimmer or switch are not included.

Which form factor or wattage combination should I select for a 12 V 60 W constant voltage application?

Choose the 60 W model rated for 120-277 V AC input to match the 12 V DC constant voltage requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.