Elemental LED
Elemental LED DI-0970-LPS3R LO-PRO Wet Loc Jct Box Driver Combo 24V 35W
A 24 V constant-voltage driver and NEMA 3R junction-box combo rated at 35 W for wet-location LED installations
- typeBallasts
- 24 V constant voltage simplifies wiring with 120 V switches
- 35 W Class 2 driver powers low-voltage LED runs safely
- NEMA 3R enclosure protects components from weather and environmental hazards
- UL 2108 508A 1598 certifications confirm safety for wet locations
- California Prop 65 notice discloses reproductive-harm chemical presence
Outdoor Wet-Location Driver Combo
This Elemental LED DI-0970-LPS3R combines a 24V constant-voltage driver with a LO-PRO NEMA 3R junction box. Rated at 35W, the Class 2 power supply suits low-voltage LED installations. The enclosure is certified to UL 2108, UL 508A and UL 1598 for outdoor use. Designed and engineered in Reno, Nevada.
Constant-Voltage Dimming Limits
The driver works with 120V switches, REIGN low-voltage dimmers and RGB or DMX controls. Constant-voltage topology means it cannot dim LEDs that require constant-current control. Output is fixed at 24V, so the connected load must match that voltage. California Proposition 65 warns of a chemical known to cause reproductive harm.
35-Watt Capacity Constraint
The 35W rating is the single figure that decides fit; any LED run drawing more power will overload the unit. Installations needing higher wattage must use a different driver. Buyers who need more capacity cannot use this combo. No other wattage options are described for this model.
Highlights
- 24 V constant voltage simplifies wiring with 120 V switches
- 35 W Class 2 driver powers low-voltage LED runs safely
- NEMA 3R enclosure protects components from weather and environmental hazards
- UL 2108 508A 1598 certifications confirm safety for wet locations
- California Prop 65 notice discloses reproductive-harm chemical presence
Specifications
| Brand | DIODE LED |
|---|---|
| type | Ballasts |
Questions about this item
Which 24V constant-voltage driver wattage fits my low-voltage LED run?
The 35W combo suits loads up to 35 watts; match the total strip or fixture draw to stay within that limit.
What does the 35W rating deliver when the driver is installed in a real circuit?
It supplies up to 35 watts of steady 24V DC to your LED load, compatible with 120V switches, REIGN dimmers and RGB/DMX controls.
What does the NEMA 3R junction-box rating cap in practice?
The UL 2108, UL 508A and UL 1598 certified enclosure protects the driver from rain, splashing water and outdoor environmental hazards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



