Eemax
Eemax SPEX75 Electric Tankless Water Heater 7500 W 240 V Single Phase Undersink
Compact 7.5 kW electric tankless heater delivers on-demand hot water at up to 2 gpm for undersink installations
- TypeWater Heaters
- Delivers instant hot water at 7500 W power
- Compact 10.75 in height fits under sinks easily
- Single-phase 240 V operation suits standard wiring
- Activates at low 0.7 gpm flow rate
- Provides adjustable 70–140 °F temperature range
Undersink electric tankless heater
The Eemax SPEX75 is an electric tankless water heater designed for undersink installation in commercial environments. It serves kitchen sinks, lavatory faucets, metering faucets and sensor faucets with on-demand hot water. The unit operates on single-phase 240 V AC power and draws 32 A at 7,500 W. It is not suited for whole-house demand or installations requiring higher flow rates.
Sustained delivery at fixed output
Under continuous use the heater maintains a maximum delivered temperature of 140 Degrees F and a minimum of 70 Degrees F. Activation requires a flow of at least 0.7 gpm and the unit tops out at 2 gpm. These limits define the steady-state envelope; the heater cannot supply more hot water than the 2 gpm ceiling regardless of inlet conditions. The compact frame measures 10.75 in high, 5.25 in wide and 3 in deep.
2 gpm maximum flow rate decides fit
The single specification that determines whether this heater fits the job is the 2 gpm maximum flow rate. If the connected fixtures demand more than 2 gpm simultaneously, the unit will not meet the load. Buyers who need higher simultaneous flow should look elsewhere. The cold inlet uses a 3/8 in compression fitting for straightforward plumbing.
Highlights
- Delivers instant hot water at 7500 W power
- Compact 10.75 in height fits under sinks easily
- Single-phase 240 V operation suits standard wiring
- Activates at low 0.7 gpm flow rate
- Provides adjustable 70–140 °F temperature range
Specifications
| Brand | EEMAX |
|---|---|
| Type | Water Heaters |
Questions about this item
How loud is the SPEX75 when it runs continuously under a sink?
The unit has no fan or compressor, so it operates silently while heating water on demand.
What electrical supply must already be in place for the SPEX75 to work?
A dedicated 240 V single-phase circuit rated for at least 32 A is required.
Will the SPEX75 activate with the low flow from my older lavatory faucet?
It needs a minimum flow of 0.7 gpm to start heating, so very low-flow fixtures may not trigger it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



